Board logo

Cheap worktop?
McLannahan - 3/3/10 at 01:50 PM

I'm looking to buy 33 metres of worktop - as cheaply as I can!

Ideally 750mm deep and not 600 and as longer length as possible. Not so bothered by look although beech effect would be great - but I thjink out of my shoddy budget!

Does anyone have any recommendations or contacts?

Thanks all

Michael


fesycresy - 3/3/10 at 02:01 PM

Do you have a 'No Frills' near you?

I seem to remember picking up 2 for about £15 each last year?


se7en - 3/3/10 at 02:16 PM

Does it have to be in good condition? if not go to a kitchen manufacturer and ask for damaged lengths; they usually sell them of cheaply.


McLannahan - 3/3/10 at 03:17 PM

Thanks chaps - Can't seem to find anything about No Frills? Is it a Welsh shop?

Good idea about the kitchen manufacturer though - condition is not vital.


thunderace - 3/3/10 at 04:11 PM

very easy 9mm wbp ply and facs it with 38mm x10mm then tile it.


ashg - 3/3/10 at 07:31 PM

my other half works for a kitchen company they usually throw loads out because its got the slightest little nick or scuff. only problem is that were a bit far apart