An el cheapo Kinzo compressor from a company that has long ceased trading...Blown head gasket.... HELP!

Make one! All searches appear to show that no spares are available, so that limits your options unfortunately.....

Just found a site info@kinzo.com

Try an email with model number and what you need, you never know!!!!

[Edited on 13/3/13 by AndyW]

As said, make one. Or remove the old one and see if you can seal it without a joint (gasket).

Thanks for the responses guys! ...Next question..Where to get suitable gasket material without having to pay a kings ransom?

if you think its worth doing rather than the cost of a new compressor, then High Temperature Manifold Gasket Material | eBay could maybe do it? Or the sheets of gasket card/paper/stuff off ebay found loads at under a tenner

[Edited on 15/3/13 by AndyW]

What sort of size gasket are we talking here ?

I used an aluminium foil carton and cut the shape out for a moped head gasket and it ran for years on it. I think a compressor would put material under less stress.

quote:

---

Originally posted by Peteff
I used an aluminium foil carton and cut the shape out for a moped head gasket and it ran for years on it. I think a compressor would put material under less stress.

---