As title.
Today I was cooking the sausages, then bang went the cooker.
It was due for an upgrade soon, so repairing is not a option.
Having had a looked at the lower priced (£3-£450) units I am now convused by the reviews. most of the ones I have looked at have many issues.
I'm hoping ther may be some good advice on this forum. Hopfuly a service engineer who's has to fix these things.
Which makes are ok and one's to avoid.
gumtree people give them away
Tbh there is very little too them and the elements are easy and cheap to replace, a few screws and a couple of wires, that's it. I've done
all the oven ones and two of the cooker ones. I just bought the replacement elements off the web.
We recently replaced ours - a freestanding electric cooker. We were toying with the idea of going for a gas hob / electric oven because our electric
hob was rubbish with a wok. We ended up buying a fairly expensive (About £800) AEG cooker with an induction hob instead of gas.
Have to say the induction is brilliant, and much more powerful compared to a normal electric hob and not far off as good as gas. The wok works
brilliantly on it, with the benefit being it is much easier to clean than gas.
If you're on a budget, certainly look at quality used before you look at budget new.
We bought a used Neff double oven that should have been about £900 originally for £100 when we moved into our house and it was nearly like new. We
bought a similar one for my mum and dad to replace theirs (both fixed hinges, not the faffy slide under ones)
I found the higher the original price tag, the less likely it was to have been abused or really used at all. It seems people don't tend to cook
much in high end kitchens. The quality of the racks, fittings and ease of disassembly for service/cleaning is something you only get if someone pays
for it upfront though.
I'm not sure you'll necessarily find the same options in freestanding cookers, but it's worth a look
quote:
Originally posted by Mr Whippy
gumtree people give them away
Tbh there is very little too them and the elements are easy and cheap to replace, a few screws and a couple of wires, that's it. I've done all the oven ones and two of the cooker ones. I just bought the replacement elements off the web.
we could get the post more car related...
I rebuilt our kitchen some time ago, and the old oven went to the garage, to do powder coating!
hint, if powder coating, heat the parts to remove oils etc, then mask, then coat.
Thanks for the replies
To be honest if it was an easy fix I would
The grill element at some point has got so hot it has drooped like soft plastic.
With every thing turned off it still blows fuses.
It was due for replacing anyawy , I was just putting it off to the spring.