Got given a free table but it needs a part making. 35mm bar, 95mm long, either nylon or delrin. Grooved down to 25mm, with a 9mm bore down the middle. Money waiting!


Table pin

I can probably help depending upon urgency

I have stock material, what tolerances and finish do you need?
Does colour matter?

No urgency, any colour, the 25 can be rough and the 35 allows a mm spare anyway (it slips into a 36 housing). I can send an accurate drawing if that helps?

A drawing would certainly help.

As I wrote that, I thought a diagram is pretty essential lol. Unfortunately, it's not my forte! Best attempt -


Table pin 2

JoelP

Another member who may be able to help is "indykid".

He made a fantastic metal part hex body + M8 threaded rod for me a while ago. Resurrected a bicycle rack for my car after the original plastic part broke.

Hope you get this sorted and the table back in use.

Description

Ignore the two decimal places, it will on an old Myford with no DRO

Perfect Howard, but with a 9mm bore down the middle as well please!

Description

That's the beast! Do you think you'll have time?

Cheers!

In the coming days. Yes

Excellent thanks!

Table_thing

PM your address

I'll let you know the postage costs.
If the part is ok please make a reasonable charitable donation to a cause close to you or your family