Have you had a look at the forum at www.mig-welding.co.uk ?
If you message the user "weldequip" he'll see you right for a decent price
HI, anybody tried one of these welders, not a make I recognise, (Chinese?). Cheers Ray
Link to Ebay
TBH Ray, it'll probably be OK, but eventually it'll need consumables such as liners, swan necks etc. so personally I'd go for a Clarke
(in fact I have), consumables are freely available.
Have you had a look at the forum at www.mig-welding.co.uk ?
If you message the user "weldequip" he'll see you right for a decent price
quote:
Originally posted by UncleFista
TBH Ray, it'll probably be OK, but eventually it'll need consumables such as liners, swan necks etc. so personally I'd go for a Clarke (in fact I have), consumables are freely available.
I have to agree..
Go for a Clarke, same sort of price,
and you WILL need spares.
David
ecosse - 26/5/08 at 08:31 AMquote:
Originally posted by Chippy
HI, anybody tried one of these welders, not a make I recognise, (Chinese?). Cheers Ray
Link to Ebay
I've not used that welder specifically, but have had dealings with the company before (Chinese) and they are one of the better brands to come out of China
Cheers
Alex
Peteff - 26/5/08 at 08:42 AMThe gun and cable look exactly like the SIP and Clarke ones, they all take the same liners, teflon or steel and parts are interchangeable. Buy it on your credit card and you'll be covered and his address is in the listing anyway.
rpm - 26/5/08 at 09:09 AMwhat are you welding? the minimum current of 60 amps is a bit high for thin sheet metal such as car body work should be fine for box section though
Mark Allanson - 26/5/08 at 09:16 AMquote:
Originally posted by rpm
what are you welding? the minimum current of 60 amps is a bit high for thin sheet metal such as car body work should be fine for box section though
...and only 4 current settings
BenB - 26/5/08 at 10:56 AMA lot of the time tools are made by one manafacturer but re-badged for different vendors. You may well find this welder is sold for more money with different stickers on it!!
e.g. I got my "hobby craft" compressor and its exactly the same as a Wolf one but 30% cheaper.. Even the accessories are the same LOL!!! They've just stuck a different sticker on it....
fatfranky - 26/5/08 at 02:16 PMquote:
Originally posted by zilspeed
Looks pretty, actually very, similar to this.
This one only goes to 140amp, but does go down to 40 as well.
I thought it was worth a punt at 73 quid.
I bought a Plasma cutter from that supplier on Easter sunday night, even allowing for the bank holiday backlog it arrived the following monday, i.e. 8 days later- I thought that was pretty bleedin good.
Only slight grumbles were that it came with a european style plug and German instructions, but i sharp swapped the plug and tyhey e mailed me a PDF with 24 hours of request
I would also agree with the comments that they're all made in the same chinese factory's with different badges theory, chances are the torches will be the same as Clarke/Sealey/SIP.