Can anyone tell mewho supplies wider panels than standard, I have built my car to the book speck but 4" wider and now looking for a nosecone and bonnet

luego

the viento is rather wide

Roadster is 2" wider than the Locost so a start in right direction...

Aalco do bodywork in kit form.




Paul G

The only people who I *know* of that do a +4" are GTS...
.... with all the inherent risks involved with buying from them!

I got my bodywork from them (although only needed a +4" scuttle as my nosecone is standard) and I made my bonnet. It is very nice.
Pity it took 6months to arrive... so lucky other things held me up!

Cheers,
James

There was a post about a year ago that showed how to widen wheel arches. The same princible could be used on nose cones.
The process used a cardboard box but i cant find it.

I am planning on widening some body grp, so I searched and found the post by Mr. Whippy:
http://www.locostbuilders.co.uk/viewthread.php?tid=62375

Shouldn't give the game away but if anyone wants a blow by blow on how to make the nose cone, scuttle etc wider without too much drama then drop me an email...

Cheers,
Mark