I need to find a 16mm T piece for my heater/expansion tank hoses.
Car Builder Solutions only do 15mm and that is all I have found on ebay.
Any ideas as I have tried the 15mm ones and they leak.

get silocone hose, its softer and clamps up better

Use a plumbers 15mm yorkshire fitting the pipes 15mm but the fitting is bigger and the solder ring ridge will provide something for the clip to to grip.

[Edited on 3/3/07 by Dave Castle]

Get a plumbers solder ring type t piece. It fits 15mm o/d pipe and as such will be at least 16mm o/d. You may need to extend it using a bit of pipe and a straight connector to get enough length for a clip.

Like this
http://www.screwfix.com/app/sfd/cat/pro.jsp?cId=100123&ts=65708&id=52984

Oops I'm a slow typist

[Edited on 3/3/07 by omega 24 v6]

Thanks gents.

Looks like a trip to B&Q is on for tomorrow.

Tweekys do a 16mm Nylon T for fuel and oil that would be ok proberly.....