omega0684
|
| posted on 14/3/09 at 10:25 PM |
|
|
my first trip out
finally got my car back in one piece this morning after installing my new fuel presure regulator. a massive thanks to claire who, after showing off
her lathe skills made me a fuel rail seal & adapter out of a solid block of ali. (then we had fish and chips from the chippy which was really
nice). anyway my fuel pressure was 66psi  so reduced that back down to 42 psi whish is what the R1 throttle bodies like.
then went to go out for a blat, fuel gauge not working!  found out that it had a bad earth so fixed that and then off i went.
car was running very very lean due to the fuel pressure reduction so had to stop three times to get the VE table values in the right sort of area.
after 20 minutes driving i managed to get the car to a drivable state, managed to get a datalog done of about 30 minutes driving so hopefully having a
look at that will help tune the car a little further.
got to say i thoroughly enjoyed getting back out on the country roads for the first time in 15 odd months!  i have fingers crossed for more sunshine
tomorrow!
and the car didn't over heat or breakdown once!
|
|
|
|
|
clairetoo
|
| posted on 14/3/09 at 10:32 PM |
|
|
Glad to see things are working nicely
I was too busy tidying my garage to go for a blat today , but if your out for a run tomorrow can I tag along 
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
Dangle_kt
|
| posted on 14/3/09 at 10:39 PM |
|
|
what a lady!
|
|
|
omega0684
|
| posted on 14/3/09 at 10:45 PM |
|
|
if all goes well tomorrow morning claire i'll pop over and see you and do a datalog to and from your place. might even do some cleaning for up
for you. haven't got a lot of money for fuel at the moment.
p.s claire those goodridge clips look awesome!
[Edited on 14/3/09 by omega0684]
|
|
|
clairetoo
|
| posted on 14/3/09 at 10:55 PM |
|
|
Kewl 
You wont recognize the garage - but theres still the `shed` to do
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
ashg
|
| posted on 15/3/09 at 12:24 AM |
|
|
female with a lathe
marry me
Anything With Tits or Wheels Will cost you MONEY!!
Haynes Roadster (Finished)
Exocet (Finished & Sold)
New Project (Started)
|
|
|
omega0684
|
| posted on 15/3/09 at 12:25 AM |
|
|
lathes...plural!
[Edited on 15/3/09 by omega0684]
|
|
|
clairetoo
|
| posted on 15/3/09 at 12:27 AM |
|
|
quote:
Originally posted by ashg
female with a lathe
marry me
Um...two lathes
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
blakep82
|
| posted on 15/3/09 at 12:35 AM |
|
|
ah clairetoo lathes. it all becomes clear now! (?)
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
clairetoo
|
| posted on 15/3/09 at 12:41 AM |
|
|
I'm a fully skilled center lathe turner - and a passable miller
Oh , and at work I am the welder/fabricator , as well as doing all the fibreglass molding.......and I can cook too
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
BenB
|
| posted on 15/3/09 at 01:12 AM |
|
|
quote:
Originally posted by clairetoo
I'm a fully skilled center lathe turner - and a passable miller
Oh , and at work I am the welder/fabricator , as well as doing all the fibreglass molding.......and I can cook too
Now this is just getting plain dirty talking
|
|
|
Paul TigerB6
|
| posted on 15/3/09 at 02:21 AM |
|
|
quote:
Originally posted by clairetoo
I'm a fully skilled center lathe turner - and a passable miller
Oh , and at work I am the welder/fabricator , as well as doing all the fibreglass molding.......and I can cook too
Dont tell us you can TIG weld too Claire - if you can its got to be "pass the tissues" time and form an orderly queue for the marriage
proposals!!!
|
|
|
bob tatt
|
| posted on 15/3/09 at 07:02 AM |
|
|
funny this thread should come up was only saying to the wife last night its about time she learnt to weld at night school. you could possibly save me
some time and money. is it just me or is the lass off salvage squad strangely attractive in a mucky hands kind of way, it might be just me though.
|
|
|
cd.thomson
|
| posted on 15/3/09 at 08:52 AM |
|
|
Nice one Omega, good start to spring! Was that high pressure just generated from using a standard injection fuel pump and the standard pressure
regulator on the end of the R1's fuel line?
Craig
|
|
|
omega0684
|
| posted on 15/3/09 at 09:38 AM |
|
|
oh no what have i started! sorry claire
hey craig, i think it was a case that the fuel pump was just too powerful for the fuel rail and reg of the R1 and since the R1 reg was factory fitted
and the pump wasn't off an R1 that is where is miss match occurred and that is why i bought the adjustable fuel pressure regulator. all is good
now though and the car is starting to get tuned now so things can only get better i hope.
[Edited on 15/3/09 by omega0684]
|
|
|
stevec
|
| posted on 15/3/09 at 10:00 AM |
|
|
Alex, I told you that pump I flogged you was more than man enough eh?. Good to see you are close now.I am taxing mine at the end of the month. And can
I join the que to marry Claire?
|
|
|
omega0684
|
| posted on 15/3/09 at 10:22 AM |
|
|
im heading over to her house later! very nice roads over that way
|
|
|
clairetoo
|
| posted on 15/3/09 at 10:41 AM |
|
|
I'll get the kettle on
Just as soon as I get that noisy diff out..........
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
zilspeed
|
| posted on 15/3/09 at 01:05 PM |
|
|
Claire
Maybe best that you just say you have a "significant other" at this point.
Whether you have or not, it would help to keep all the DOM (And DYM for that matter) in check.
What are you lot like...
|
|
|
clairetoo
|
| posted on 15/3/09 at 01:12 PM |
|
|
Well , I do have a `significant other` - he's yellow , got a V6 under the bonnet , and keeps nagging me to go out for a drive
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
zilspeed
|
| posted on 15/3/09 at 01:14 PM |
|
|
Oh FFS, now they'll be even worse...
|
|
|
ashg
|
| posted on 15/3/09 at 02:24 PM |
|
|
oh man why did i move from coventry to kent again :-(
i vote that when we want to tell a female what a good day we have had working on the car, we should skip our other halfs and u2u claire lol.
[Edited on 15/3/09 by ashg]
Anything With Tits or Wheels Will cost you MONEY!!
Haynes Roadster (Finished)
Exocet (Finished & Sold)
New Project (Started)
|
|
|
Fozzie
|
| posted on 15/3/09 at 06:55 PM |
|
|
It's been said many a time.....women make the best welders....... ...nowt new there......
Claire....what are you like teasing these poor chaps like this.....shame on you girl!
Fozzie
[Edited on 15-3-09 by Fozzie]
'Racing is Life!...anything before or after is just waiting'....Steve McQueen
|
|
|
