blakep82
|
 posted on 24/4/09 at 11:08 PM |
|
|
washers - table 3?
whats 'table 3'?
I'm going to buy some for putting all my suspension together, found 200 for £3, which seems more tempting than 50 rose joint side spacers for
£40, but i don't know what table 3 means?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
|
|
iank
|
| posted on 24/4/09 at 11:18 PM |
|
|
You'll need a copy of BS3410 to find out the exact specifications - table 3 is the bit that defines imperial heavy gauge washers.
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
blakep82
|
| posted on 24/4/09 at 11:20 PM |
|
|
ah, so its a measure of how thick they are?
i need nice thick ones.
cheers Ian
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
ReMan
|
| posted on 24/4/09 at 11:27 PM |
|
|
They probably are, but it also describes their diameter in respect to the bolt size. And you could have thick thin or med thickness.
|
|
|
