Howlor
|
| posted on 19/6/09 at 02:24 PM |
|
|
Help needed bending some Toobin!
I am on with a project for my little lad and require 3 hoops bending up out of 32mm round tube or something near.
I will measure exactly what I need but they are all about 600mm across and the legs need to be about 700mm on two of them and 300mm on the other. Just
two 90 degree bend in each to form hoops.
Any body in Locost land help me out for beer tokens, or vino tokens if you prefer?
Many thanks,
Steve
|
|
|
|
|
blakep82
|
| posted on 19/6/09 at 02:28 PM |
|
|
can't help unfortuantely, but sounds very interesting 
what are you making?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Howlor
|
| posted on 19/6/09 at 02:33 PM |
|
|
Something like this, he is MonsterJam mad!
Steve
|
|
|
blakep82
|
| posted on 19/6/09 at 02:36 PM |
|
|
wicked! motorised? engined?
wish i had something like that when i was little!
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Howlor
|
| posted on 19/6/09 at 02:44 PM |
|
|
It's going to have the honda style 4 stroke engine hopefully. 4 quad rear tyres, disk brake etc.
I was planning on using the hoops as a roll cage front and rear then ally panelling in between for the body as GRP will not last him ten minutes!
Steve
|
|
|
Minicooper
|
| posted on 19/6/09 at 03:09 PM |
|
|
I'm miles away near Winchester but I can bend 25mm, 30mm or 38mm, if you don't get anyone local I can do it for you as long as you cover
the costs
Cheers
David
|
|
|
