Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: OT: Help me source gaiters/bellows for work.
James

posted on 10/10/12 at 12:19 PM Reply With Quote
OT: Help me source gaiters/bellows for work.

So, finally got myself a job!

Quite interesting work so far but will go into that more later.

Been asked by the boss to source a set of rubber bellows or gaiters.

Usage:
At work there is a clean room (lab) where they build electronic components. Hanging from the concrete ceiling is a crane that moves across the length of the room.

It hangs from 16mm threaded rods (about 10 of them along the length of the track).

There is a suspended ceiling large, stiff tiles about 600mm below the concrete ceiling.

The ceiling tiles have holes in them for the threaded crane support rods to pass through. The holes are approx 25mm to allow for movement of the rods when the crane moves around.

The problem:
Dirt from the area above the ceiling tiles gets down through the holes around the threaded rod into the 'clean room'.


So, I require some gaiters with a 16mm hole that can bolt/glue/fix to the ceiling tile. If they go to the far side of the tile and affix 'inside' that is not a problem.

They need to be quite soft/flexible rubber so the crane movement doesn't shift the whole tile via the gaiter being too 'stiff'.


Anyone able to help?


A completely different solution I've not thought of is acceptable. But I'm only 2 weeks into the job so nothing too crazy or expensive please!


Thanks!
James





------------------------------------------------------------------------------------------------------------

"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights." - Muhammad Ali

View User's Profile View All Posts By User U2U Member
fesycresy

posted on 10/10/12 at 12:28 PM Reply With Quote
Search for 'roof dectites', they are soft rubber roof seals.





-----------------------------------------------------------------------------------------------------

The sooner you fall behind, the more time you'll have to catch up.

View User's Profile View All Posts By User U2U Member
Agriv8

posted on 10/10/12 at 12:32 PM Reply With Quote
If you cut some old tyre inner tube into a C shape then make a cone out of this affix arround road and to tile and sorted.

Peharps you are wanting a more elagant soloution.

ATB Agriv8





Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a tree full of a*seholes .............


View User's Profile View All Posts By User U2U Member
tegwin

posted on 10/10/12 at 12:40 PM Reply With Quote
Armoured cable glands would do the job!?





------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!

www.verticalhorizonsmedia.tv

View User's Profile Visit User's Homepage View All Posts By User U2U Member
adithorp

posted on 10/10/12 at 12:44 PM Reply With Quote
How about universal fit steering rack gaiters/ The smallend should accomodate 16mm and then push the other end through the tile so it traps in one of the corugations. Hold in place with PU adhesive on the top side or cut a disc/ring from thin ply to insert inside to spread the gaiter and hold in place (or make a ring from thick welding rod).





"A witty saying proves nothing" Voltaire

http://jpsc.org.uk/forum/

View User's Profile View All Posts By User U2U Member
watsonpj

posted on 10/10/12 at 12:50 PM Reply With Quote
or gearstick gators, rubber ones will stretch over the threads
some here

could have some nice carbon fibre surrounds with them also

regarsd Pete

View User's Profile View All Posts By User U2U Member
rusty nuts

posted on 10/10/12 at 07:21 PM Reply With Quote
Ball joint boots from your local motor factors, might need a small mounting plate made up but not too difficult
View User's Profile View All Posts By User U2U Member
James

posted on 9/11/12 at 11:23 AM Reply With Quote
quote:
Originally posted by fesycresy
Search for 'roof dectites', they are soft rubber roof seals.


Good call that man. After a right runaround I finally got what I wanted from a chimney flue supplier.

They were a bit confused when asking me what chminey it was for and I said to suspend a factory crane!

Thanks all!





------------------------------------------------------------------------------------------------------------

"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights." - Muhammad Ali

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.