nick205
|
| posted on 8/11/17 at 09:10 AM |
|
|
3D PDF view keyboard shortcuts
Morning,
A customer has sent me a 3D PDF file to look at. The file opens OK and I can rotate the object on screen.
Are there any keyboard shortcuts to get specific views of the part - e.g. top, side, bottom etc?
Any help would be much appreciated.
Thanks,
Nick
|
|
|
|
|
Bunje
|
| posted on 8/11/17 at 09:51 AM |
|
|
on my cad sytem control and the arrow keys gives some views. and on another cad program its fnumbers at the top of the keyboard
|
|
|
nick205
|
| posted on 8/11/17 at 10:12 AM |
|
|
Thank you - will have a try and see what happens!
|
|
|
nick205
|
| posted on 8/11/17 at 11:48 AM |
|
|
No joy with that I'm afraid!
Googled for help as well, but nothing found yet.
|
|
|
bi22le
|
| posted on 8/11/17 at 06:40 PM |
|
|
Not that I know of.
If you find anything of use, let me know. I often send 3D PDFs and they are hard to navigate around at the best of times
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
nick205
|
| posted on 9/11/17 at 08:54 AM |
|
|
quote:
Originally posted by bi22le
Not that I know of.
If you find anything of use, let me know. I often send 3D PDFs and they are hard to navigate around at the best of times
Sorry - still not found a way of doing it!
I was lucky work wise in being able to return to an engineer and ask him to produce orientated views direct from the CAD model. It got me around the
issue yesterday, but still annoyed that I can't do what must be possible somehow within the 3D PDF itself. Used to b an engineer and use 2D
& 3D CAD software daily, but been away from that for 15 years now.
|
|
|
