NS Dev
|
 posted on 17/5/06 at 10:26 AM |
|
|
Radical SR3 brake discs?
Does anybody know what road car the brake discs used on a radical SR3 are from?
Need to get a couple of sets and reluctant to pay factory prices!
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
|
|
pk
|
| posted on 17/5/06 at 12:30 PM |
|
|
I got hold of a disk catalogue from my local motor factors - it has all the disk measurments in it.
So if you can identify the disk from the book, you'll get a link to the car they are used on, then have a look at the calipers on the car etc.
may be the long route but you will get their.
Come to think of it there must be a radical owners club - they will know!!
|
|
|
ned
|
| posted on 17/5/06 at 01:27 PM |
|
|
Nat,
I didn't think these discs were from a road car, i thought/assumed (possibly wrongly) that they were bespoke items by wilwood or ap? Do they
have a seperate bell or are they one piece with the mounting centre?
Ned.
beware, I've got yellow skin
|
|
|
rally design
|
| posted on 17/5/06 at 03:31 PM |
|
|
Radical brake discs
Please send a sketch of the discs,including as many dimensions as possible and we will check whether Wilwood have an equivalent..Rally Design
|
|
|
Peteff
|
| posted on 17/5/06 at 04:49 PM |
|
|
Swap the hubs for some that take a known cheap disk and tell the driver not to use them too much as they will probably fade anyway.  Transits have a
good setup, four pot and vented. 
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
NS Dev
|
| posted on 17/5/06 at 09:34 PM |
|
|
quote:
Originally posted by ned
Nat,
I didn't think these discs were from a road car, i thought/assumed (possibly wrongly) that they were bespoke items by wilwood or ap? Do they
have a seperate bell or are they one piece with the mounting centre?
Ned.
Hi ned!
They're one piece surprisingly, but we've just got a price of £97 a pair now which sounds more like it and so we;re going with ones from
radical at that price. I'll measure one up anyway when we take it off so we can see what they are!
cheers folks
Nat
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
