NS Dev
|
| posted on 8/11/06 at 10:55 AM |
|
|
cool, thanks for all the help, getting the bits ordered now!
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
|
|
JoelP
|
| posted on 8/11/06 at 11:11 AM |
|
|
the colour of the wiring can catch you out, since new wire is blue and brown. However, i believe that the new wire was available from jan 2004, and
the part p stuff wasnt enforced until later that year (some say jan 05 but i was sure it was apr04), so if you say it was all done then, you are ok.
If you need a length of red and black 6mm wire, give me a shout! 
|
|
|
nitram38
|
| posted on 8/11/06 at 11:19 AM |
|
|
Oops forgot about that!!!!!!!!
But in this case, only extra tails needed?
|
|
|
NS Dev
|
| posted on 8/11/06 at 12:44 PM |
|
|
yep, only extra tails needed, and all the rest is safely red and black!
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
