mackei23b
|
| posted on 24/9/07 at 11:55 AM |
|
|
Reseting House Alarm! (9800 Model)
Hi there
Hopefully someone can help. How can I reset a 9800 Alarm back to the default settings as I've lost the alarm code.
Many thanks in advance!
Cheers
Ian
|
|
|
|
|
skydivepaul
|
| posted on 24/9/07 at 12:03 PM |
|
|
pretty sure you turn off all power, battery and mains. take out the small NVM eeprom 8 pin? power up with the eeprom out and then replace it once
powered up.
that should reset the code and all other parameters. you will have to set up all the circuits again though.
i have the manual at home if you get stuck
cheers
Paul
http://www.smartideasuk.com
http://www.smartmapping.co.uk
HD CCTV
3D design solutions and integration
IP security systems
access control systems
|
|
|
joneh
|
| posted on 24/9/07 at 12:07 PM |
|
|
Have you just broken in and need to turn the alarm off? 
|
|
|
ernie
|
| posted on 24/9/07 at 05:22 PM |
|
|
Do not remove eprom. will check in workshop manual and post laterTextText
|
|
|
mackei23b
|
| posted on 24/9/07 at 07:50 PM |
|
|
Many thanks
Now sorted.
Cheers
Ian
|
|
|
.jpg){kind=avatar}
