DarrenW
|
| posted on 15/2/08 at 04:07 PM |
|
|
quote:
I usually regard the info I receive on this forum as a 'seed' for my own ideas. I sift through them, pick the bits I like and combine them
into something new.
I also weight some people's opinions higher than those from some others... and I'm not listing who comes into which category! 
Or to be a little less PC - you often give your bullshit filters a good exercising.
|
|
|
|
|
David Jenkins
|
| posted on 15/2/08 at 04:36 PM |
|
|
(and very true...)
|
|
|
Schrodinger
|
| posted on 15/2/08 at 09:55 PM |
|
|
Why don't you make an alluminium chassis for it?
Keith
Aviemore
|
|
|
kipper
|
| posted on 16/2/08 at 12:04 AM |
|
|
going on a bender
My dad was a cooper and he used to set the barrel staves in the hoops at the bottom and then make a fire with some oak shavings inside the base. he
would then use a rope around the splayed staves at the top and twist the rope ends which pulled the staves together until he could load the top hoops
on and drove them down with a bloody big hammer and a grooved drift.
The oak staves were bent to shape with the heat and not a little skill.
It was great to watch as a small boy.
Regards Kipper.
|
|
|
