omega0684
|
| posted on 9/6/08 at 12:57 PM |
|
|
stainless welding costs
hi all,
i have recently purchased an innavate lc-1 lambda kit and now need the exhaust drilling and the sensor mount welding in to the exhaust, is there
anyone on her close to coventry that can do that? if not how much should i expect to pay for the work to be done
I love Pinto's, even if i did get mine from P&O!
|
|
|
|
|
Davey D
|
| posted on 9/6/08 at 01:08 PM |
|
|
It shouldn't cost more than a couple of quid in someones back pocket to get it done if you have the exhaust, and boss ready to go in. its only a
10 min job. unfortunately i am a lil' bit too far away
|
|
|
omega0684
|
| posted on 9/6/08 at 01:12 PM |
|
|
should i pre-drill it before i take it to someone, custon chrome are in nuneaton, only 15 minutes away
I love Pinto's, even if i did get mine from P&O!
|
|
|
procomp
|
| posted on 9/6/08 at 02:20 PM |
|
|
Hi if custom chrome are only 15 min away thats should be good. Failing that if you want to bring it to Birmingham a bit of a trek. i will sort it for
you.
Just be sure when the hole is drilled it is bigger than the 18mm thread to allow better readings to be taken if using a rolling road for the AFR
setting. A common mistake made by many is to drill too small a hole.
Cheers Matt
|
|
|
omega0684
|
| posted on 9/6/08 at 02:45 PM |
|
|
hi matt,
the sensor came with a threaded mounting piece that needs to be welded into the exhaust, so should i just cut the hole to the same diameter as that.
I love Pinto's, even if i did get mine from P&O!
|
|
|
procomp
|
| posted on 9/6/08 at 03:09 PM |
|
|
Hi as long as you can see clean through the threaded boss without the pipe restricting the view to the internal of the pipe it will be fine. Ie a 19mm
hole.
Cheers Matt
|
|
|
madteg
|
| posted on 9/6/08 at 07:19 PM |
|
|
I am in kettering, i can do it one night for you if you want, tel 07511644440
|
|
|
omega0684
|
| posted on 10/6/08 at 06:34 PM |
|
|
went to custom chrome today, £15 to get my welding done, not to bad i guess.
I love Pinto's, even if i did get mine from P&O!
|
|
|
