myke pocock
|
| posted on 30/6/13 at 04:04 PM |
|
|
Wiring NVR Switch
I have just bought an NVR switch unit from Axminster Power Tool Centre for my Myford but theres no wiring diagram. The ON/OFF switch has spade
terminals 14 and 24 marked on the side of the switch as OUT and terminals 13 and 23 as IN. The Emergency Stop button has two sets of screw terminals
marked 1 & 2. There is no earth provision. In idiot speak (thats ME!) can anyone tell me how to wire it up from the mains and to the motor please?
|
|
|
|
|
trextr7monkey
|
| posted on 30/6/13 at 07:55 PM |
|
|
Hi Myke,
I'm not a sparky but the drills etc at work that have stop buttons fitted simply break the live wire, neutral is not cut and just passes through
the box.
We have a couple of their (Axminster) pre wired sockets which come with NVR a switch fitted that we use on router tables, really good.
I'm at work til about 9pm tomorow night as it is an open evening when people come to look at kids work so if you want to pop in and check out
how one of the machines is wired you are very welcome
atb
Mike
http://www.flickr.com/photos/14016102@N00/ (cut and paste this dodgey link)
Our most recent pics are here:
http://s129.photobucket.com/albums/p211/trextr7monkey/
|
|
|
