zzr1100rick2
|
| posted on 26/9/08 at 07:33 PM |
|
|
honda gx160 kart engine question
Hi has anyone had any dealings with the above engine wondered if it is possible to removed internal govenor and regulate revs with carb throttle
stop
cheers Rick
|
|
|
|
|
TOO BADD
|
| posted on 26/9/08 at 08:01 PM |
|
|
If you contact Rodger Sheffield at Formula 6 Association ( Google ) he may be able to help you, or turn up at one of their meetings. We raced in the
modified class with 160's using 2 stroke carbs and all sorts of mods. I can't remember how to delimit these but you can rev the nuts off
them once done. Ours did once and threw the rod and left a nice slippery racing line for every body!
|
|
|
stevec
|
| posted on 26/9/08 at 08:02 PM |
|
|
Yes you can remove the govener, I removed the choke plate and opened up the carb bore (very carefully) as well. Bit of a pig to start but you get more
air through, also drilled the main jet to .8mm.
Steve.
|
|
|
