oldtimer
|
| posted on 7/12/08 at 11:57 AM |
|
|
You know your build is going slowly when....
In my case, it is now 8 months since I asked about rivets............and I still have not even got as far as cutting the panels........
|
|
|
|
|
clairetoo
|
| posted on 7/12/08 at 12:24 PM |
|
|
No point in rushing it 
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
richardlee237
|
| posted on 7/12/08 at 12:27 PM |
|
|
You know your build is going slowly:-
When you have forgotten where you put the chassis.
Or it could be just a senior thing !
Quote Lord Kelvin
“Large increases in cost with questionable increases in performance can be tolerated only in race horses and women.”
Quote Richard Lee
"and cars"
|
|
|
mistergrumpy
|
| posted on 7/12/08 at 12:33 PM |
|
|
Well come on then. There comes a point when you have to bite the bullet and stop thinking about it and just do it and learn from your mistakes. I
think before the end of today you should aim to get at least one panel cut. You'll probably find that the rest shouls start to flow after that.
|
|
|
907
|
| posted on 7/12/08 at 12:36 PM |
|
|
You know that your build is going slowly:-
when your hammers gone rusty.
Paul G
Image deleted by owner
[Edited on 7/12/08 by 907]
|
|
|
BenB
|
| posted on 7/12/08 at 12:37 PM |
|
|
Wow! As good as I am at putting things off until tommorow, sometimes you just have to get on and do it. At this rate petrol will have run out by the
time your build is finished!!
|
|
|
mistergrumpy
|
| posted on 7/12/08 at 12:39 PM |
|
|
What about "you know your builds going slowly when... you get near the end and it's taken that long they've changed the rules and
introduced something called IVA!" 
|
|
|
MikeR
|
| posted on 7/12/08 at 01:17 PM |
|
|
Ahem, you know your build is going slowly when they change the rules and introduce something called SVA - the sods then go and update it to IVA!!!!
(almost true if you say the build started when i got the book)
|
|
|
blue2cv
|
| posted on 7/12/08 at 01:26 PM |
|
|
I built a welding table for my build last xmas and still have not boarded the top yet
|
|
|
theconrodkid
|
| posted on 7/12/08 at 02:08 PM |
|
|
i went to my garage one day and discovered a half finished MG midget i,d forgotten about
who cares who wins
pass the pork pies
|
|
|
ernie
|
| posted on 7/12/08 at 02:42 PM |
|
|
I looked in the garage today and the car is in the same state as it did after finishing the last race at Snetterton. with oil leaks and half finished
radiator covers ( for the bedroom) sitting on top of the roll cage. NEXT WEEK,, MUST START OVERHAUL!!!
|
|
|
jollygreengiant
|
| posted on 7/12/08 at 04:20 PM |
|
|
You know when your build is going slowly when...............
You received a notice from your local council stating that they have received a complaint from the mice in your garage stating that their home is now
too small and they demand that you extend it. Their home being your build.
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
blakep82
|
| posted on 7/12/08 at 05:21 PM |
|
|
You know when your build is going slowly when...............
you realise you first tried dropping your engine in on boxing day...
only took a year to work out that its easier to drop the car over the engine 
not sure how i'm going to get the gearbox in now. will have to be done from underneath, but i don't know how i'm going to get the
bolts tightened
not a major step forward, but well chuffed with myself
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Peteff
|
| posted on 7/12/08 at 05:56 PM |
|
|
quote:
Originally posted by theconrodkid
i went to my garage one day and discovered a half finished MG midget i,d forgotten about
Did you shut the door quick and forget about it again John I'd like a Midget to make into a Frogeye one day when everything else is out of
the way I'll have to get on with it again when the weather picks up
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
sorens2
|
| posted on 7/12/08 at 06:57 PM |
|
|
Get on with it......
I´m stuck here without any car as MNR is building it. Deliverytime late January.
I can do nothing but wait.
I have only waited a week now and it is already killing me.
Soren S2
|
|
|
Stott
|
| posted on 7/12/08 at 06:57 PM |
|
|
You know it's going slowly when you started it, and by the time it was a rolling chassis they had brought out something called SVA, and by the
time it's finished, it'll be history and they'll bring out something called IVA...............
|
|
|
DarrenW
|
| posted on 8/12/08 at 09:33 AM |
|
|
When my mates brother turned 18 his dad bought him a Morris Minor Van. It has had flip front, V8, jag irs axle, etc etc etc. Still not finished and
his brother is about 42 now!
Thankfully the 911SC he is rebuilding is coming on a lot faster.
|
|
|
