benjamman
|
posted on 28/4/09 at 04:16 PM |
|
|
Bushes where did you get yours from?
i priced up polyurethane bushes at deamon tweeks an was a little surprised at how much they cost , £15 ish each , i really dont know anything about
bushes an i think/hope i was looking at the wrong ones
what should i be looking for ?
where did you get yours from ?
how much did they cost?
thanks Ben
|
|
|
adam1985
|
posted on 28/4/09 at 04:43 PM |
|
|
i think demon eeks are quite dear any way aint they try rally design think thats where mine were from
|
|
tomprescott
|
posted on 28/4/09 at 05:44 PM |
|
|
I got nylon ones made up from a guy on ebay who makes quite a few bits for locosts and haynes roadsters, complete set for the front cost about £30 I
think. Seem very well made, no doubt someone will be along in a minute to say that nylon is rubbish though! Offhand, I think it was Dave Oxley....
|
|
bitsilly
|
posted on 28/4/09 at 06:46 PM |
|
|
Where do I get my bush from? Mmmmmmmmmmmm.
|
|
hampshe
|
posted on 28/4/09 at 07:08 PM |
|
|
Try Wisbech engineering, i think they supply GTS with their bushes, if their bushes are as good as the rest of their engineering work, should be ok
|
|
iank
|
posted on 28/4/09 at 07:40 PM |
|
|
quote: Originally posted by hampshe
Try Wisbech engineering, i think they supply GTS with their bushes, if their bushes are as good as the rest of their engineering work, should be ok
I think most of the manufacturers buy from Wisbech - they are very cheap.
http://www.wisbech-engineering.co.uk/Wisbech_Engineering_-_Interior_%26_Miscellaneous_Products.html
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
MikeR
|
posted on 28/4/09 at 07:48 PM |
|
|
Procomp supply proper polyflex (or is it superflex) ..... anyway, proper what evers.
Guess what i've got
|
|
alistairolsen
|
posted on 29/4/09 at 10:16 AM |
|
|
so the wisebech ones work out at about 4.74 each if you buy the inner and outer sleeves and bush halves.
Anyone got a price on the procomp ones?
|
|
Minicooper
|
posted on 29/4/09 at 10:34 AM |
|
|
The Wisebech one are hard and not suitable for de dion, live axles mountings, also the width of the metal tube is narrow compared to the others
available and it's a very tight squeeze getting a 25mm tube welded properly to it.
Cheers
David
|
|