shaun megablade
|
posted on 23/3/10 at 12:25 PM |
|
|
fireblade 893 rectifier and wiring
i am just sorting out a wiring problem with my friends mk indy,it has melted wiring to the rectifier and the rectifier has been damaged.
does anyone have these laying around please?
|
|
|
Gav
|
posted on 23/3/10 at 12:55 PM |
|
|
IIRC a lot of people use the superdream rectifier as its cheaper and a bit more robust than the blade item.
Wiring here:
Description
|
|
02GF74
|
posted on 23/3/10 at 12:58 PM |
|
|
^^^ that is bog standard 3-phase rectifier/regulator.
ebay is chokka with them
I bought 2, kawasaki GPx550, a tenner each.
|
|
gingerprince
|
posted on 23/3/10 at 01:15 PM |
|
|
A lot of people use the Superdream as mentioned. I got one from a newer fireblade off e-bay for a few quid to replace mine. Did away with the
block-connector and soldered it all in. Been fine ever since (touch wood).
|
|
shaun megablade
|
posted on 23/3/10 at 01:33 PM |
|
|
superdream is that a make or a type??
where can i get the right one from easily?
|
|
Spaz
|
posted on 23/3/10 at 02:41 PM |
|
|
quote: Originally posted by shaun megablade
superdream is that a make or a type??
where can i get the right one from easily?
Honda Superdream CB XXX
|
|
iDENTITi
|
posted on 23/3/10 at 02:58 PM |
|
|
quote: Originally posted by gingerprince
A lot of people use the Superdream as mentioned. I got one from a newer fireblade off e-bay for a few quid to replace mine. Did away with the
block-connector and soldered it all in. Been fine ever since (touch wood).
All our bikes have larger honda rectifiers I think.. Just chopped the blocks off and stuck some coloured bullets on! Then wrapped the lot in tape.
Simple.
|
|
mad-butcher
|
posted on 23/3/10 at 04:44 PM |
|
|
Honda CB250N or CB400N Superdream Genuine ones NOT Pattern. staring to get rare now and people with them know what there worth
tony
|
|
shaun megablade
|
posted on 23/3/10 at 06:11 PM |
|
|
i have a rectifier coming tommorow,does it matter which yellow wire goes to where?
thanks
|
|
iDENTITi
|
posted on 23/3/10 at 06:47 PM |
|
|
quote: Originally posted by shaun megablade
i have a rectifier coming tommorow,does it matter which yellow wire goes to where?
thanks
No mate, it doesnt.
|
|
shaun megablade
|
posted on 23/3/10 at 07:08 PM |
|
|
thank u,hopefully have it all sorted for him tommorow then!
|
|
shaun megablade
|
posted on 24/3/10 at 04:25 PM |
|
|
on the wiring diagram the black +12v feed?is this a switched live coming into the rectifier?or is it a 12v output from the rectifier to the battery??
|
|
shaun megablade
|
posted on 24/3/10 at 05:17 PM |
|
|
im still having problems,im gona start up a new thread under technical to try and get to the bottom of it.if anyone can help please post up under my
new thread.
thanks
|
|