Printable Version | Subscribe | Add to Favourites
<<  1    2  >>
New Topic New Poll New Reply
Author: Subject: Huge Garage Clear out - Pic Heavy !!!
Krismc

posted on 22/10/13 at 08:49 PM Reply With Quote
Huge Garage Clear out - Pic Heavy !!!

Well as some of you might know, ive sold my seven and im getting another project !!

I want to completely empty my garage as ive collected items that a) I dont use b) I dont need c) id rather sell on on d) take up room that I just cant justify

Ill put up the pictures for now and anything any one wants Ill give you a price or make an offer.

No fighting!!!

Kris


Ford Steering Wheel in as mint 1980's style... I hope you need this for IVA and not for you Sierra rebuild


Ford Steering Wheel Centre for the piece of turd above


Comms kit with head pieces and cables and adpaters various...even a old skool nokia...who has a nokia these days .......me!!


Shiney Ball with hole in bottom and a grub screw...not even sure where it came from!




Various New belts....I cant use a tape measure so I bought 3 that didnt fit


Nice unused kit.....pity the fool who bought this and now is selling it for pennys


6inch 3 claw and 4 inch 2 claw, unused also apears spot on for a job that i never did




Will fit motor bike, cycle or bus.....


Ford Hand brake......phaa there over rated id do without!


Its not just this orange piece of fluff...ive got 3 other bits, will trim a t-shirt or some shirt cuffs nicely!


Horny...as new! Young and Horny eh


rear axle boot clips set...stops the grease flicking on the back of ya neck when ya rear cover isnt on.




Ford Zetec Cam Locking Tool.... also called a piece of metal with hole in it!!


Special Nuts that I can remember at the moment what they are for


Ford Zetec Thermo Housing Sensor Sender heater temp thingy majiggy


Ford Zetec Oil Pick up Seal... Crate delivery only


Water cap, Ford Thermo and random bits....all will rot to the ground shall i keep them much longer


Relay.....£5.99 motor world robbing bleeding bar stewards


Steering Wheel Horn - Various Fitments not sure what ones though


Cable for throttle linkage or other uses......Bondage??






Throttle boddie and large filter hoseclips......for a 3 pot engine


Ford Zetec Pipe from side of engine..... old crap that i kept for no god dam reason


Stainless Steel Cable Ties... boring


Various Pipes and Tubes that may be interesting to some folk but not me


Chequer 'U' Trim very nice fitting and finish, sorry I used the long bit and left the short bit for you!


U trim to make your car IVA friendly, HA HA good luck....Iva is never friendly


Samco Elbow reducer....not even mine, i bought it because it was blue and not because i needed it.


Burton bleed hose Clutch or brakes - uber shiney and f-ing expensive new


Pully for alternator to allow v belt fitment...if you only got one V and like it old school


Square fog light....no it doesnt read books


2 of these ford pullys....ill send both as one is good and other one squeeks (you may like the squeek)


Gear Gator Surround...dull needs painting and erm straightening and erm sanding....might be easier buying the other one ive got!


Gear gator surround - Shiney


Super Sticky glued and thick Heat shrink Tubing 38 to 12mm its the business 12inchs worth, 12 inch of internal stickyness


Gear Gator - needs finishing and a lot of cleaning its dusty


Indicator stork...or is it a light one.....look at the pictures and you will find out.



Bearing Pillow Block x 2 ...No jokes here!!


Gear gators...not quite made!!!


Boots for either erm steering or erm something else.


Hose Extension........unfortunatly not the type your thinking!!


A diff cover, the 3.62 LSD that it was attached too seems to have walked from my garage into some scroats seven without my knowledge, he isnt getting the back plate...you are.


Steering adapter...this thing will drive you wild with excitement.


Rain suit....wow i wish they glowed like that all the time, they are actually dark silver



And a train...yes im really selling it!!!!



PRICES ARE COLLECTION ONLY POSTAGE IS EXTRA AND UP TO ROYAL MAIL NOT ME!!!! ;D

1) Ford Steering Wheel in as mint 1980's style *****SOLD*****
2) Ford Steering Wheel Centre *****SOLD*****
3) Comms kit with head pieces etc STILL FOR SALE £5
4) Gear knob *****SOLD***** Pending Payment
5) Various New beltsSTILL FOR SALE £5
6) Impact Set FIRST REFUSAL TO Daddylonglegs £4 AWAITING PAYMENT
7) Pullers *****SOLD***** Mike
8) Side RepeatersSTILL FOR SALE £3
9) Ford Hand brakeSTILL FOR SALE £5
10) 3 x Orange P trim VinylSTILL FOR SALE £3
11)Horn *****SOLD***** Mike
12) Rear axle boot clips setSTILL FOR SALE £5
13) Ford Zetec Cam Locking Tool FIRST REFUSAL TO CRAIGR £10 including samco Awaiting decision
14) Special Nuts STILL FOR SALE £2
15) Ford Zetec Thermo Housing SensorSTILL FOR SALE £2
16) Ford Zetec Oil Pick up Seal STILL FOR SALE £2
17) Water cap, Ford Thermo and random bitsSTILL FOR SALE £5
18) RelaySTILL FOR SALE £2.50
19) Steering Wheel Horn STILL FOR SALE £2
20) Cable for throttle *****SOLD***** Pending Payment IanM67
21) Throttle boddie and large filter hose clips STILL FOR SALE £3
22) Ford Zetec Pipe from side of engineSTILL FOR SALE £2.50
23) Stainless Steel Cable Ties *****SOLD***** Mike
24) Various Pipes and Tubes STILL FOR SALE £5
25) Chequer 'U' Trim very nice fitting and finishSTILL FOR SALE £3
26) trimSTILL FOR SALE £5
27) Samco Elbow reducer.FIRST REFUSAL TO CRAIGR WITH ZETEC TOOL - Awaiting Decision
28) Burton bleed hose Clutch or brakes *****SOLD***** Neil P
29) Pully for alternatorSTILL FOR SALE £2
30) Square fog lightSTILL FOR SALE £2
31) 2 of these ford pullysSTILL FOR SALE £3 *** 1 SOLD***** Pending Payment Davie
32) Gear Gator Surround FIRST REFUSAL TO SMAC £4
33) Gear gator surround - Shiney *****SOLD***** Pending Payment
34) Heat Shrink - *****SOLD***** Pending Payment
35) Gear Gator STILL FOR SALE £3
36) Indicator stalk *****SOLD***** u2u sent with postage, awaiting payment.
37) Bearing Pillow Block x 2 FIRST REFUSAL TO GREGF27 £8 Pair Royal Mail want £8.60 delivery... im sure they are gay
38) Gear gators unmadeSTILL FOR SALE £4
39) Boots STILL FOR SALE £3
40) Hose ExtensionSTILL FOR SALE £10
41) A diff coverSTILL FOR SALE £5
42) Steering adapter *****SOLD*****
43) Rain suit MediumSTILL FOR SALE £5
44) Train STILL FOR SALE £4

[Edited on 24/10/13 by Krismc]





Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.

Is this a TRADE ADVERTISEMENT?? Click HERE to report it!

View User's Profile View All Posts By User U2U Member
ianm67

posted on 22/10/13 at 09:24 PM Reply With Quote
What do you want for the throttle cable and heat shrink (posted to Reading)?
Cheers,
Ian





Always biting off more than I can chew.....

View User's Profile Visit User's Homepage View All Posts By User U2U Member
smac

posted on 23/10/13 at 10:16 AM Reply With Quote
Hi

Let me have a price for the gearknob and gear surround

Simon

View User's Profile View All Posts By User U2U Member
neilp1

posted on 23/10/13 at 11:12 AM Reply With Quote
Kris I'll take the steering boss/adapter and the Burton bleed hose Clutch or brakes - uber shiney and f-ing expensive new!
and I'll be able to pick up.

Neil

View User's Profile View All Posts By User U2U Member
b3ngy

posted on 23/10/13 at 11:28 AM Reply With Quote
How much for the ford steering wheel and centre posted?? And yes it is for Iva!!!

Ben

View User's Profile View All Posts By User U2U Member
CRAIGR
Contributor






Posts 2760
Registered 30/8/05
Location Sussex
Member Is Offline

Photo Archive Go!
Building: Built v8 striker/blade fury/ R1 westy,now zetec we

posted on 23/10/13 at 12:13 PM Reply With Quote
Zetec cam locking bar with hole in please . And diameters of samco reducer hose.

[Edited on 23/10/13 by CRAIGR]

View User's Profile View All Posts By User U2U Member
Dick Axtell

posted on 23/10/13 at 02:05 PM Reply With Quote
2nd dibs on the steering wheel centre/horn button, pls!! If neilp doesn't take it first.





Work-in-Progress: Changed to Zetec + T9. Still trying!!

View User's Profile Visit User's Homepage View All Posts By User U2U Member
Daddylonglegs

posted on 23/10/13 at 05:14 PM Reply With Quote
What do you want for the hazard/light stalk and the impact driver chap?





It looks like the Midget is winning at the moment......

View User's Profile View All Posts By User U2U Member
gregf27

posted on 23/10/13 at 05:15 PM Reply With Quote
Bearing pillow blocks please, u2u me a price
many thanks

View User's Profile E-Mail User View All Posts By User U2U Member
Krismc

posted on 23/10/13 at 06:09 PM Reply With Quote
wow lots of u2u's

[Edited on 24/10/13 by Krismc]





Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.

View User's Profile View All Posts By User U2U Member
b3ngy

posted on 23/10/13 at 06:33 PM Reply With Quote
You are a little too far for me to collect. Any chance you are willing to package it up if I arrange courier??

Cheers, Ben

View User's Profile View All Posts By User U2U Member
Krismc

posted on 23/10/13 at 06:40 PM Reply With Quote
Of course Matey! Ill leave at reception at work, ill give it a wheeyyyy if you want?





Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.

View User's Profile View All Posts By User U2U Member
CRAIGR
Contributor






Posts 2760
Registered 30/8/05
Location Sussex
Member Is Offline

Photo Archive Go!
Building: Built v8 striker/blade fury/ R1 westy,now zetec we

posted on 23/10/13 at 06:45 PM Reply With Quote
Whats the diameters on the samco elbow Kris
View User's Profile View All Posts By User U2U Member
Krismc

posted on 23/10/13 at 08:28 PM Reply With Quote
ill find out tomorrow matey.





Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.

View User's Profile View All Posts By User U2U Member
smac

posted on 24/10/13 at 03:07 PM Reply With Quote
Can I have the shiny gear surround instead? If youll post give me a posted price for that and the knob

Simon

View User's Profile View All Posts By User U2U Member
loggyboy

posted on 24/10/13 at 03:09 PM Reply With Quote
Interested in the comms kit , can I have more details (or a brand/model so I can google!)





Mistral Motorsport

View User's Profile View All Posts By User U2U Member
daviep

posted on 24/10/13 at 03:38 PM Reply With Quote
I'll take the alternator pulleys if you can post (I only need the good one)?

Cheers
Davie





“A truly great library contains something in it to offend everyone.”

View User's Profile E-Mail User View All Posts By User U2U Member
Krismc

posted on 24/10/13 at 03:46 PM Reply With Quote
quote:
Originally posted by loggyboy
Interested in the comms kit , can I have more details (or a brand/model so I can google!)


They where bought from Lidl during a motorbike special week and I never used them, ill see what its got wrote on the rear.





Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.

View User's Profile View All Posts By User U2U Member
Krismc

posted on 24/10/13 at 03:47 PM Reply With Quote
quote:
Originally posted by daviep
I'll take the alternator pulleys if you can post (I only need the good one)?

Cheers
Davie


Yes ill send you a u2u with postage.





Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.

View User's Profile View All Posts By User U2U Member
Krismc

posted on 24/10/13 at 03:47 PM Reply With Quote
quote:
Originally posted by smac
Can I have the shiny gear surround instead? If youll post give me a posted price for that and the knob

Simon


Most certainly.





Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.

View User's Profile View All Posts By User U2U Member
Krismc

posted on 24/10/13 at 05:30 PM Reply With Quote
quote:
Originally posted by loggyboy
Interested in the comms kit , can I have more details (or a brand/model so I can google!)


tronic h 3167





Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.

View User's Profile View All Posts By User U2U Member
Krismc

posted on 24/10/13 at 05:59 PM Reply With Quote
quote:
Originally posted by CRAIGR
Whats the diameters on the samco elbow Kris


44.5mm to 31.5 mm approx samcos web site might be exact.





Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.

View User's Profile View All Posts By User U2U Member
b3ngy

posted on 24/10/13 at 06:25 PM Reply With Quote
Kris you have email.
View User's Profile View All Posts By User U2U Member
Krismc

posted on 24/10/13 at 07:44 PM Reply With Quote
To all buyers, lookers, sellers, people ive u2u'ed with prices and weirdos

There is a 3-5 parcel service that is only £3.95 with my hermes for parcels that are too expensive by royal mail, if ive gave you a £5, £6 or £8 royal mail price then ignore it.

Note to every one when you pay please use the ref ''your locost name'' ''the item you bought'' it makes things a bit easier.

Kris





Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.

View User's Profile View All Posts By User U2U Member
Gaz4562

posted on 24/10/13 at 11:25 PM Reply With Quote
I'll have the side repeaters please.
View User's Profile View All Posts By User U2U Member
<<  1    2  >>
New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.