TrophyJem
|
| posted on 27/2/14 at 09:45 AM |
|
|
Brake hose fitting thread to Ford clutch slave
Does anybody know what thread the fittings are on a Ford clutch slave cylinder?
I want to get some hoses made.
|
|
|
|
|
russbost
|
| posted on 27/2/14 at 10:01 AM |
|
|
Any modern car will be m10 x 1.0 with very few exceptions
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
TrophyJem
|
| posted on 27/2/14 at 02:28 PM |
|
|
Thanks.
They can't both be 10mm though as one is smaller than the other
[Edited on 27/2/14 by TrophyJem]
|
|
|
russbost
|
| posted on 27/2/14 at 02:58 PM |
|
|
Sorry, you mentioned hoses, only one is a hose fitting, the m10 x 1.0 one the other is for a bleed nipple & is either m7 or m8, can't tell
from the pic as they are very similar though I think it's m8, if you're looking to take a hose off from the smaller one to bleed outside
the bellhousing if it's m8 you can do it with a m8 banjo fitting, but you'll need to find a suitable bolt. Our m8 banjo bolts are m10 x
1.0 (fit pitbikes etc.) the bleed nipple thread if it's m8 will be m8 x 1.25, banjo bolts are available in that size. If it's m7 then
it's time for a rethink or some drilling/retapping!
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
TrophyJem
|
| posted on 27/2/14 at 09:23 PM |
|
|
Cheers for the info.
Most helpful.
|
|
|
