Lordyplums
|
posted on 30/9/15 at 06:45 PM |
|
|
Having a clearout, plus on the lookout!
Hi guys,
Having decided to build a car for 750mc Sports Specials next season I'm having a clearout (see below). Items are on eBay but you can always
message me here.
I've found a sound 1.8 silvertop Zetec plus got a type 9 gearbox.
I'm looking for an inlet and twin 40 webers, a bell housing to mount engine to gearbox, sump/baffle/pickup for the Zetec so it will fit into an
Aries Locost chassis, seat/seats, harnesses, nodiz, extinguishers.
Any advice on how to prep the engine and what should and can be done within the regs much appreciated.
I travel a lot with work so can collect or if anyone wants stuff from the bits below, deliver, any parts
Cheers
Phil
919 Firedblade engine complete
Honda Fireblade 919 complete
ZX9R engine complete
Kawasaki ZX9R Complete Engine
ZX9R stainless exhaust to suit locost/Haynes/7s
http://www.ebay.co.uk/ulk/itm/281814144080
Two 1300 Kent engines. 1 good, 1 spares only
http://www.ebay.co.uk/ulk/itm/281814133868
Stainless steel exhaust 4into1 to suit Kent 1300, maybe 1600?
http://www.ebay.co.uk/ulk/itm/281814149366
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
Lordyplums
|
posted on 30/9/15 at 06:51 PM |
|
|
Also on the lookout for team dynamics or compomotive Cxr wheels, if poss with a048 tyres too
Plus a Sierra steering column, maybe an etb dash
Cheers
|
|
Matt21
|
posted on 30/9/15 at 07:32 PM |
|
|
Very interested in the 919 engine!
Can you tell me what year it is? (and is there a speedo sensor on top of the gear box?)
Any damaged bits etc?
and are carbs included?
I'll check postage and get back to you asap
|
|
ali f27
|
posted on 30/9/15 at 07:43 PM |
|
|
HI I HAVE PAIR OF 40 S but on pinto manifold and have couple of bell housings if any good
|
|
Gaz4562
|
posted on 30/9/15 at 07:50 PM |
|
|
What's the odds of the manifold fitting or being made to fit a zzr 1200. Any chance you could post some measurements, like the pipe diameter and
the centre measurements of the four pipes. Sorry to be a pain.
|
|
Matt21
|
posted on 30/9/15 at 07:55 PM |
|
|
sent a u2u
|
|
Lordyplums
|
posted on 30/9/15 at 10:26 PM |
|
|
Will check measurements for the z plus year on the 919 in the morning guys
Cheers
|
|
JacksAvon
|
posted on 30/9/15 at 11:06 PM |
|
|
Phil,
Seat
Consider making a bag seat. Very comfy, a perfect fit and inexpensive. You will see lots in sports specials/locosts
I can send you a guide of how to do this and what you need.
Harness
By new. Contact TRS directly, great service and cheaper than other outlets for the same thing.
Nodiz
Doubt you will find one second hand. For what they cost contact Motorsports Electronics directly
Extinguisher.
Currently £99 brand new including postage
Jack
|
|
Lordyplums
|
posted on 1/10/15 at 10:06 AM |
|
|
The zx9 exhaust has 50mm o/d on the outlet. Inlets are 290mm overall width approx., spacing aprox 85mm centres, outlets 35mm o/d
The 919 is a 1998, is complete with carbs also plus I have a separate listing for the exhaust:
Honda CBR919 KITCAR EXHAUST MANIFOLD KIT TO SUIT LOCOST SEVEN CARS
Cheers
Phil
|
|
Lordyplums
|
posted on 1/10/15 at 10:33 AM |
|
|
Kent exhaust gone guys
|
|
Gaz4562
|
posted on 1/10/15 at 02:28 PM |
|
|
The exhaust is away off fitting mine unfortunatly
|
|
capri_big_jim
|
posted on 1/10/15 at 07:10 PM |
|
|
Hello mate. Can you pm me your best price on the zx9 engine, also is it a 'C' type engine?
Thanks
Jim
|
|
Lordyplums
|
posted on 3/10/15 at 01:33 PM |
|
|
Blade engine and exhaust gone now guys
Thanks
|
|