JoelP
|
posted on 28/7/24 at 07:46 PM |
|
|
Anyone with a lathe fancy making me one of these please?
Got given a free table but it needs a part making. 35mm bar, 95mm long, either nylon or delrin. Grooved down to 25mm, with a 9mm bore down the middle.
Money waiting!
![](/galpreviews/20240728_204106.jpg) ![Table pin](/gallery/20240728_204106.jpg) Table pin
|
|
|
HowardB
|
posted on 28/7/24 at 08:31 PM |
|
|
I can probably help depending upon urgency
I have stock material, what tolerances and finish do you need?
Does colour matter?
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|
JoelP
|
posted on 28/7/24 at 10:16 PM |
|
|
No urgency, any colour, the 25 can be rough and the 35 allows a mm spare anyway (it slips into a 36 housing). I can send an accurate drawing if that
helps?
|
|
HowardB
|
posted on 29/7/24 at 04:15 AM |
|
|
A drawing would certainly help.
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|
JoelP
|
posted on 29/7/24 at 07:29 AM |
|
|
As I wrote that, I thought a diagram is pretty essential lol. Unfortunately, it's not my forte! Best attempt -
![](/galpreviews/20240729_082638.jpg) ![Table pin 2](/gallery/20240729_082638.jpg) Table pin 2
|
|
nick205
|
posted on 29/7/24 at 10:12 AM |
|
|
JoelP
Another member who may be able to help is "indykid".
He made a fantastic metal part hex body + M8 threaded rod for me a while ago. Resurrected a bicycle rack for my car after the original plastic part
broke.
Hope you get this sorted and the table back in use.
|
|
HowardB
|
posted on 29/7/24 at 10:31 AM |
|
|
![](/galpreviews/table_pin.JPG) ![Description](/gallery/table_pin.JPG) Description
Ignore the two decimal places, it will on an old Myford with no DRO
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|
JoelP
|
posted on 29/7/24 at 02:14 PM |
|
|
Perfect Howard, but with a 9mm bore down the middle as well please!
|
|
HowardB
|
posted on 29/7/24 at 04:47 PM |
|
|
![](/galpreviews/2table_pin.JPG) ![Description](/gallery/2table_pin.JPG) Description
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|
JoelP
|
posted on 29/7/24 at 06:00 PM |
|
|
That's the beast! Do you think you'll have time?
Cheers!
|
|
HowardB
|
posted on 29/7/24 at 07:28 PM |
|
|
In the coming days. Yes
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|
JoelP
|
posted on 29/7/24 at 08:06 PM |
|
|
Excellent thanks!
|
|
HowardB
|
posted on 3/8/24 at 11:52 AM |
|
|
![](/galpreviews/20240803_124620.jpg) ![Table_thing](/gallery/20240803_124620.jpg) Table_thing
PM your address
I'll let you know the postage costs.
If the part is ok please make a reasonable charitable donation to a cause close to you or your family
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|