oliwb
|
| posted on 19/5/07 at 07:05 AM |
|
|
What do you think of your manufacturer?
I know this is going to be a controversial topic but following on from a heated debate I was wanting to know what people think of their manufacturers
and the service/quality they provide. I'm only asking as I personally think there are two sides to every story. I have had good and awfull
service from Tiger and I'm sure many people have had the same experiences with other kit producers. This is NOT a slagging match I'd just
like to open up a discussion about any times you received exceptionally good service or quality and any times when it was lacking? Also what do
people think on the whole about their manufacturers. Would you buy bits from them at a greater cost to yourself to help support them? (If this
thread goes silly its getting deleted - so there is no point in trying to provoke ppl I'd just like to get an idea of what everyone thinks of
them. Could be interesting! Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
|
|
chockymonster
|
| posted on 19/5/07 at 07:08 AM |
|
|
Service from MNR has been great.
There were some issues but Chris worked really hard to resolve them
PLEASE NOTE - Responses on Forum Threads may contain Sarcasm and may not be suitable for the hard of Thinking.
|
|
|
graememk
|
| posted on 19/5/07 at 07:13 AM |
|
|
not had a single prob with MK, i called them the other day about going up to see them to get the car set up and they said just turn up sat morning and
we'll do it for you
|
|
|
nitram38
|
| posted on 19/5/07 at 07:16 AM |
|
|
I built my own.......I am brilliant, but then again I am biased!!!!!!!!!! 
|
|
|
wilkingj
|
| posted on 19/5/07 at 07:21 AM |
|
|
quote:
Originally posted by CaLviNx
I get a decent service from my supplier most of the time, even without my gender being brought into question as a way of obtaining parts
faster..............
I suppose everyone will have good and bad experiences with every supplier so its just a case of thats how the world works good and bad on differing
days.
I'm a prime example I get decent service from GTS while others don't/haven't, i don't know why..
Totally agree, Ive never had a problem with GTS either, bought the chassis kit from Luego, and got a lot sof bits and pieces from GTS. Never had a
problem with either.
1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.
Best Regards
Geoff
http://www.v8viento.co.uk
|
|
|
jos
|
| posted on 19/5/07 at 07:47 AM |
|
|
Excellent service time after time from MAC#1 both Colin and Mark.
The real test was one cold wet wintery day when i was due to go for SVA trying to get my pinto started (stuck open exhaust valve on 1 cyliner and open
exhaust valve on another plus worn piston rings all unknown to me) when Mark had foolishly let me have his mobile number, and I rang him at 6 in the
morning. His wife Sam answered the phone and woke him up to talk to me.
Didnt make the SVA but he was on the phone to me for a good half hour and he seemed happy to help.
[Edited on 19/5/07 by jos]
.: Motorsport / motor racing circuit / track wall art Apex Traxs :.
|
|
|
donut
|
| posted on 19/5/07 at 07:58 AM |
|
|
I never had an issue with MK, They were brilliant but from my experience MAC#1 seem to come out on top for service.
Andy
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car.
http://www.flickr.com/photos/andywest1/
|
|
|
Johnmor
|
| posted on 19/5/07 at 08:16 AM |
|
|
Bought from Luego, and all was ready on the day and all required parts were there.
However they did go bust a month later!!!
I have not needed to go back to them for anything, so as a one stop shop it was no problem.
I realise that is not always an option for most as many people build kits over many years and prefer to do it in stages.
I think if (when ) i build another kit I will try to do the same. Save up like mad and buy what I need in one go . I think doing this you have more
power and are almost guaranteed better service because if they dont get it right first time they don't get a sale.
Another advantage is they dont have you over a barrell, if you buy just the chassis they know very well you have no option but to come back for
pannels etc so you are committed to their product.
Maybe I'm too cynical.
|
|
|
flak monkey
|
| posted on 19/5/07 at 08:34 AM |
|
|
Ditto Marks comments about GTS. Never had any major issues. But I can admit that sometimes Darren doesnt answer emails as quickly as you would hope. I
dont have a problem with this, and as such if I really need to speak to him, phone him.
I have also had good service from MK engineering and MNR on odd occasions.
My expectations from all manufacturers I have dealt with have been met.
Quality wise, I cannot fault any of the companies I have dealt with.
David
Sera
http://www.motosera.com
|
|
|
Avoneer
|
| posted on 19/5/07 at 09:19 AM |
|
|
I've had great service from MAC#1 and MK.
Ok service from STUART TAYLOR.
Very poor service from TIGER.
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
zxrlocost
|
| posted on 19/5/07 at 09:31 AM |
|
|
I hope no one take this as a personal comment
but theres a lot of people who build kit cars and they dont half put up with some shite ie which they wouldnt put up with in the "REAL
WORLD"
awful organisation on the manafacturers behalf
forgetting parts in kits when youve travelled quite a long way
waiting for parts for months on end when youve paid
and yet you all seem to want to back off the companies and say they things like
there Busy give em time
there a great bunch of lads aahhhh!!!
theyve got loads of orders on
would you put up with the same from a company in Every Day life =NO!
all people expect is a bit off honesty
no one minds waiting for parts but when they totally fob you off with stupid answers and people believe them
I ordered an Exhaust off Martin Keenan as someone needed to borrow it
and he did it for me quick no probs fantastic
I also wanted a roll bar off him and he was honest he said Im busy for a week or two can I do you one this week
absolutely no probs
ordered a Sprocket adaptor from MNR the other day
arrived in the post next day brilliant!
its not the next day or two week delivery thats needed its the communication
chris( now everyone will blame me for the above or Im lying hehe)
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
caber
|
| posted on 19/5/07 at 09:46 AM |
|
|
My manufacturer is a really top bloke. Could be a bit faster and it would help if he didn't keep making design changes . He does seem to make
every effort to resolve mistakes and hide the evidence!
Costs, well they have increased at a a rate similar to the inflation rate of a dodgy African state. Much can be attributed to design changes during
construction however building a spares kit that will provide almost a complete donor kit does seem somewhat extravagant as does purchasing another of
the same kind of item cheaper on ebay with the excuse that this will reduce the actual cost of the finished car, maybe this has something to do with
the ever growing spares pile
Oh the pleasures of a self-build, no one else to blame!
Caber
|
|
|
Danozeman
|
| posted on 19/5/07 at 02:35 PM |
|
|
Luego were good for me. Although they did sell my side panels to someone else which wasnt really a problem for me.
GTS served me well apart from a long refund process for parts not supplied. The parts i did get were very good.
MK and mnr have been superb.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
JoelP
|
| posted on 19/5/07 at 04:29 PM |
|
|
i dont think ive ever had bad service from any supplier. You always get better service if they know you or if you've been to them in the past,
hence i usually call MNR if i want stuff, as they know me and i like them.
|
|
|
t.j.
|
| posted on 19/5/07 at 07:52 PM |
|
|
Parts are costly around here,
Called Tiger here and they where not really interrested in delivering parts.
Then we have VM77; too expensive
Irmscher; see VM77
Donkervoort; can't buy a kit
Caterham; see VM77
MNR; not around here
MK indy; not asked
Dax; i bought it allmost
But i'm Dutch, so i build my own.
Best service, i look good after myself
|
|
|
David Jenkins
|
| posted on 19/5/07 at 08:27 PM |
|
|
Yep - nobody to blame but myself...
The only 'specially made' bits I bought were the GRP nose and wings from Triton. No complaints there...
|
|
|
%20(WinCE).JPG)
