takumi
|
posted on 7/9/07 at 10:00 AM |
|
|
OJZ Engineering
I would like to thank OJZ Eng for being top chaps.! big-it-up..
Finally got around to ordering the last bits for my manifold, a merge colelctor and some 45deg bends..
Top chaps, highly recommended.
-tak pleased
[Edited on 13-9-07 by takumi]
RobinHood 2B 2.0i pinto, Keihin 38mm Carbs, lightened flywheel, O'Mori remote filter kit, 10 row oil cooler. Modified head, 10.2cr, special
valves FR22 cam, 4- 1 header.
|
|
|
TangoMan
|
posted on 10/9/07 at 11:07 PM |
|
|
I have to agree. I sourced my bends from them and had a look at some of their handiwork while there. Very impressive!!!
If I was building a show car, I suspect they would be geting my pipework.
Summer's here!!!!
|
|
takumi
|
posted on 12/9/07 at 08:08 PM |
|
|
silly grumble..
The 4-1 merge collector is fantastic..
But the 2x 45 degree bends I also ordered, have magically become 90degree bends..and not even each swagged on one end.. a tad anoying..
Probably some monkey packing my order didnt use his porridge cake brain.. to think... 45 or 90.... hmmm..... bananas...
Hope they can sort this tomorrow, I only picked up the parts this evening as they were delivered to my work address.. so weren't able to phone
them..
|
|
takumi
|
posted on 13/9/07 at 08:43 AM |
|
|
This is one of their collectors
![](/galpreviews/a616996-S1031563.JPG) ![Rescued attachment S1031563.JPG](/gallery/a616996-S1031563.JPG) Rescued attachment S1031563.JPG
RobinHood 2B 2.0i pinto, Keihin 38mm Carbs, lightened flywheel, O'Mori remote filter kit, 10 row oil cooler. Modified head, 10.2cr, special
valves FR22 cam, 4- 1 header.
|
|
takumi
|
posted on 13/9/07 at 08:44 AM |
|
|
The internal
![](/galpreviews/a616999-S1031565.JPG) ![Rescued attachment S1031565.JPG](/gallery/a616999-S1031565.JPG) Rescued attachment S1031565.JPG
RobinHood 2B 2.0i pinto, Keihin 38mm Carbs, lightened flywheel, O'Mori remote filter kit, 10 row oil cooler. Modified head, 10.2cr, special
valves FR22 cam, 4- 1 header.
|
|