Nosbod
|
| posted on 18/9/07 at 07:44 PM |
|
|
Any advice for a newbie please.
Hello all.
I'm new the kit car scene but after many months of thought and finally acceptance by "her indoors" I'm going ahead with my
first kitcar build.
I have looked at many sites and read the mainstream magazines and have narrowed it down to 2 models, namely the Tiger Avon and the MK Indy.
I guess that both models have pro's and cons and would like to get some opinions and draw on the experience of you guys to help me decide.
Cost as always is an issue (i'm a tight northerner  ) and as far as my "hands on" experience goes I've been dabbling with
cars and bikes for about 15 years. My occupation is a precision engineer so i'm not afraid of the technical challenges/aspects involved.
I am leaning towards a car engine version but have not ruled out a bike aspirated build. Again any advice on this score would also be welcomed.
Any pointers and advice you can give would be much appreciated.
Thanks in advance. 
Chris.
|
|
|
|
|
AndyH
|
| posted on 18/9/07 at 07:48 PM |
|
|
MK everytime.
Car or bike engine???
As he dropped the firework and stood well back.
|
|
|
NeilP
|
| posted on 18/9/07 at 07:49 PM |
|
|
Chris,
Hold on tight, amigo - I feel that you are about to get a deluge of views from the seemingly vast numbers of BEC and CEC afficinados in Yaarkshaar -
Blag a few rides - That will a.) get you 'proper' hooked and b.) probably solve your BEC/CEC conundrum...
Cheers, Boat-Anchor Fetisher
If you pay peanuts...
Mentale, yar? Yar, mentale!
Drive it like you stole it!
|
|
|
rusty nuts
|
| posted on 18/9/07 at 07:49 PM |
|
|
Out of the two from what I have seen I suspect the MK is the better . PS welcome to the nuthouse
|
|
|
coozer
|
| posted on 18/9/07 at 07:54 PM |
|
|
Have you not considered the MNR?
I suspect living in Beverley you have seen loads of them on the way to the Vosa place?
I found the 1.8 zetec engine with bike carbs and megajolt the cheapest option for me.
(Dodging flack behind the couch!)
[Edited on 18/9/07 by coozer]
1972 V8 Jago
1980 Z750
|
|
|
Jimbob
|
| posted on 18/9/07 at 07:55 PM |
|
|
Mk
Bike engine
Done 
James
|
|
|
donut
|
| posted on 18/9/07 at 07:57 PM |
|
|
Look at MNR and MAC#1 as the products are good and service excellent.
If it were a toss up between MK and Tiger i would have an MK every time......and i did.....twice
[Edited on 18/9/07 by donut]
Andy
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car.
http://www.flickr.com/photos/andywest1/
|
|
|
matt.c
|
| posted on 18/9/07 at 08:17 PM |
|
|
Ever heard of the BIKE ENGINE CAR OWNERS CLUB?
Try to get a ride in both CEC and BEC. You will know which one to have after being out in them.
MNR is a very nice kit with great customer service.
MK is a very good allrounder.
Avon!! All i have to say is BODY WORK!
[Edited on 18/9/07 by matt.c]
|
|
|
Gixer Indy
|
| posted on 18/9/07 at 08:19 PM |
|
|
quote:
Originally posted by Jimbob
Mk
Bike engine
Done
James
and a speed camera detector
Flat out til you see God, then BRAKE!
|
|
|
graememk
|
| posted on 18/9/07 at 08:22 PM |
|
|
from where you live look at mk and mac1
i have a cec but might bild a bec next time
maybe
what ever you have it will be fast
|
|
|
bigrich
|
| posted on 18/9/07 at 08:43 PM |
|
|
out off your initial short list MK but haveing built 2 mac#1's then i would say check them out also.
if you want a nice everyday driver choose a car engine if you want a full on adrenaline fueled ear to ear grin then a bike engine is a must.
.JPG)
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
|
Dangle_kt
|
| posted on 18/9/07 at 09:09 PM |
|
|
i'm a newbie too, I've just bought a part built CEC, but I'm selling the zetec engine on bike carbs on Saturday (it was only
delivered on sunday) so I can buy a bike engine for it.
I had a go in steve blade engined car and was sold - the power is like a switch, it revs forever and is silly fast.
I guess it depends on what you want the car for, I want it for quick blast to blow out the cobwebs on a weekend or sunny evening - i want it to be a
rush - and I want to do occasional trackdays, basically I want a bit of animal on a budget so the small amount of time I get is fun from start to end,
hence BEC.
If I wanted something a little more sain i'd have stuck with the cec, i'm sure it would have still been pretty damm quick, but it just
wasn't quite what i was after.
dunno about manufacters i'm afraid - i got the cheapest option which is a part built.
|
|
|
Hellfire
|
| posted on 18/9/07 at 09:31 PM |
|
|
Get to MK on a Saturday morning, try a passenger ride in both a CEC and a BEC and then decide which bike engine you want to fit.
Seriously though, it depends what sort of driving you intend doing. If you want to cruise up and down the motorway all day long or tour the country,
then a bike engine is what you need.
If you intend having a drive out every now and then, in the evening or at weekends with a few trackday and drag events thrown in, then a bike engine
is what you need.
Phil
Edited to add - The MK is the one you want.
[Edited on 18-9-07 by Hellfire]
|
|
|
Simon
|
| posted on 18/9/07 at 11:07 PM |
|
|
Chris,
First orf, welcome.
Second orf, as you're a precision engineer (and tight), ignore the advice of all that given above, and build your own.
Not only is it immensely satisfying, you'll be able to build it exactly the way you want it, and it'll cost you half what a kit will
cost
ATB
Simon
|
|
|
Paul TigerB6
|
| posted on 18/9/07 at 11:37 PM |
|
|
As the current builder of a Tiger B6 ( and owner of a Tiger S6 for the previous 7-years) I would have to say...... go for the MK...... or
Mac#1.............or MNR VortX.......... or RAW Striker for a 1st time build.
[Edited on 18/9/07 by Paul TigerB6]
|
|
|
tul214
|
| posted on 19/9/07 at 05:40 AM |
|
|
Chris,
I live in Beverley and own a Tiger Super 6 with a Toyota engine. I love the engine but if buying/building again i would be up the road to
Harrogate!!
If you want anything else drop me a u2u.
1.6 Raw Super6 sold
|
|
|
tim windmill
|
| posted on 19/9/07 at 07:04 AM |
|
|
Hi Chris,
I only live in South Cave and i am building an MK at the moment with a zetec, you are more than welcome to come and have a look. There are a few of us
about local to you with MKs.
|
|
|
02GF74
|
| posted on 19/9/07 at 09:04 AM |
|
|
why has noone suggested Westfield? not that I am but just wondering....
|
|
|
Avoneer
|
| posted on 19/9/07 at 11:01 AM |
|
|
Havin built an Avon and dealt with MK, MAC#1 and a few other - Don't build an Avon.
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
finlay
|
| posted on 19/9/07 at 11:31 AM |
|
|
MNR
best company, good support, very good chassis
i ve just ordered the vortex RT+
all the best with the build
cheers
|
|
|
DarrenW
|
| posted on 19/9/07 at 12:13 PM |
|
|
From where you live id say try and arrange factory visits to MK, Mac#1 and MNR. All doable in a day and if you pre-book appointments you may be taken
out in all 3.
|
|
|
Nosbod
|
| posted on 20/9/07 at 05:29 PM |
|
|
Thanks for all the advice.
I have spoken to MK and am heading there this Saturday morning.
Will keep you updated on my progress
|
|
|
.jpg)
.jpg)
%20(WinCE).JPG)
