oliwb
|
| posted on 23/11/07 at 06:37 PM |
|
|
Ford Fiesta Q's
Sorry off topic but does anyone have to hand the clearances for adjust the valves for a 51-reg 1.3 endura-e engined ford fiesta? Cheers. Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
|
|
theconrodkid
|
| posted on 23/11/07 at 07:07 PM |
|
|
8 and 16 thou from memory,do 1 cylinder at a time not rule of 9
who cares who wins
pass the pork pies
|
|
|
thunderace
|
| posted on 23/11/07 at 07:38 PM |
|
|
arrr the 1.3 endura-e engined ford fiesta
is sounds like a babys rattle lol and do you get asked at the pump thats petrol .
i just take them down till it stop shakin its rattle.
0.2 inlet , 0.5 outlet
http://www.fiestaturbo.com/forums/guide-how-to-adjust-tappets-vt96865/
[Edited on 23/11/07 by thunderace]
|
|
|
oliwb
|
| posted on 23/11/07 at 11:40 PM |
|
|
Thanks guys, also for the U2U link....Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
MikeRJ
|
| posted on 24/11/07 at 12:18 AM |
|
|
quote:
Originally posted by thunderace
0.2 inlet , 0.5 outlet
For an Endura those measurements are in inches
|
|
|
