Board logo

Phoenix/ Stiker mkIV Bodywork on ebay
philfingers - 8/11/14 at 08:59 AM

Sylva Phoenix fibreglass race road track car body panels
seems cheap

cb500t - 8/11/14 at 09:23 AM

/Seriously thinking of this,but whats missing ?

adithorp - 8/11/14 at 11:21 AM

quote:
Originally posted by cb500t
/Seriously thinking of this,but whats missing ?


No sills/side-pods.

cb500t - 8/11/14 at 11:31 AM

Easy to aquire??

dickie b - 8/11/14 at 11:53 AM

I would presume the Raw Phoenix sidepods should work but may need a bit of fettling

jeffw - 8/11/14 at 11:57 AM

Stock Phoenix ones are (from Raw). I'm not sure the modern standard Phoenix ones will match the older MkIV Clubman ones though.

mark chandler - 8/11/14 at 04:28 PM

Would this drop over a Chapman Locost frame?

dickie b - 8/11/14 at 05:15 PM

If the locost chassis is same as the striker it will - but I think the Locost wheelbase is longer.

As for the pods- i looked at making one up in metal to replace the GRP one covering the exhaust on my Fury.
A sheet of ally rolled and pinned to some vertical spars is fairly easily done but you would lose some of the subtle contours and shaping of the design - so I binned the idea. But if you are not fussed by such things (and that phoenix's bonnet bulge is awful!) then worth considering.