I purchased with the intention of IVA'ing the car and using it on the road however health problems will now prevent me from doing this.
chassis is very well built (using sierra running gear) and has a full roll cage.
the car is a rolling chassis, with all bodywork (which will need sanding and painting) it has a 5 speed type 9 gearbox fitted with prop and gearshift.
caterham alloy wheels x5
st170 engine included but not fitted , also i have all the kit to run the engine on the original ford ecu (included) with the PATS immobiliser working as it should , the loom has been stripped , cut back and labelled up ready to be fitted in the car which would be pretty much plug and play and will retain the oem vvt.
as the car has been stood the most of the work would be taking bits off (wishbones / hubs etc) and cleaning and repainting them.
part that would be needed are as follows ( there may be other stuff but this is the main things i can see)
engine mounts need to be fabricated
radiator / fan and associated pipework
exhaust system
dash blank (although a small koso digidash is included)
fuel pump and fuel pump driver (from an st170)
front brake flexis
pickup would be from Hull , East yorkshire
the full thing owes me £1200 and thats what i would like for it .
any questions please ask ! ,
for the same reasons im also selling a 2011 benelli tornado shown below , 11k miles asking £3000
Cheers
Ray
