Board logo

Mazda RX8 231 6spd box
adampage - 19/10/20 at 01:30 PM

Hi, another part of my aborted project for sale - an immaculate RX8 box.

It's the 6 speed, which fits most engines pretty easily with an adapter available from a couple of suppliers, it's very similar to a type 9 in length and output etc, but it's a bit fatter, so check it fits in the tunnel.

It's in very clean condition, rotates smoothly, changes very neatly and tightly, I've had it for a while now planning to put it in a project, but I then bought a combined eng & box so it's not needed. Comes with shifter in good condition.

Happy to send some photos if you u2u.

Prices seem to vary widely from £150-280 from a scan of ebay, and I think this is a good clean one, so I'd say £175. GIven the weight I assume collection is easier, or delivery's likely to be another £50 ish I guess?

I'm in Stone, Staffs, might be out & about a bit over half term, or I could leave it with family in Willenhall near Walsall if easier.

Thanks
Ad


adampage - 2/11/20 at 09:28 AM

Hi all,

I'll try this one on ebay or elsewhere I think as it's not a usual Locost fit, but I forgot to add that I have the little adapter needed to move the slave cylinder to make more clearance which is often used when fitting this box to other engines, and some instructions on little mods to the oil seal at the back etc, to help anyone with the conversion/fitting.

Thanks
Ad


sam919 - 5/11/20 at 06:50 PM

Hi, if you can arrange a courier I’ll take it please.

sarrenberg@hotmail.com if you want further correspondence

Regards


adampage - 5/11/20 at 06:56 PM

Hi Sam
No problem, I’ll get a quote and package it up, I’ll email with details.
Thanks
Ad


sam919 - 5/11/20 at 07:01 PM

Ok great, I’ll pass on address details etc when I get your email 👍