About to buy a integrated dash for my haynes roadster. Initial thoughts are the Acewell 7859 however I am being put off by having to stick a magnet
onto my propshaft. Is there any options for a proximity sensor rather than a magnetic switch?
I like the cost of the Acewell, any other suggestions?
I have a Koso DL03-SR with gps antenna in my hotrod really nice bit of kit I think all in it was £170 from digital speedos .co.uk
quote:
Originally posted by ian locostzx9rc2
I have a Koso DL03-SR with gps antenna in my hotrod really nice bit of kit I think all in it was £170 from digital speedos .co.uk
Has all the warning lights except the brake warning light you may need to check you use a gps unit for Iva someone on here will have the answer .
I have a Koso DB 02. It came with an adaptor to plug onto my mechanical speedo drive. It didn't have all the right symbols for IVA on the dash surround so I printed some off onto Acetate
I've got that acewell and don't use the magnet. It works perfectly with my standard mx5 speed sensor
my mate is selling a digi dash pro if you are interested
quote:
Originally posted by ian locostzx9rc2
Has all the warning lights except the brake warning light you may need to check you use a gps unit for Iva someone on here will have the answer .
quote:
17 Speedometer and Reverse Gear
Note 1. The speedometer must be of a type suitable for M1 vehicle use. The types manufactured for bicycles, racing only, those that rely on GPS or those that require switching as a separate function to that of operating the vehicle or those that have a separate power source from the vehicle or where they do not operate as an automatic function when the vehicle is driven are not permitted. Where the device is in question the presenter may provide evidence as to the suitability of the device for road use from the manufacturer of the device.
quote:
Originally posted by MK9R
my mate is selling a digi dash pro if you are interested
quote:
Originally posted by MK9R
my mate is selling a digi dash pro if you are interested
Going to go for the Acewell. I do like the KOSO OLED unit but would need to scale, somehow, the senders 0-190 ohms to a range the guage can use.