First Post
Bobyspit - 4/1/09 at 10:29 PM
Ok I want a Zetec engine with bike carb attached to a Type 9 gearbox. help on spec and how!!!
Rob
Mark Allanson - 4/1/09 at 10:32 PM
You will never attach bike carbs to a type 9 box, its just not possible
Andi - 4/1/09 at 10:38 PM
quote:
Originally posted by Mark Allanson
You will never attach bike carbs to a type 9 box, its just not possible
LOL
clairetoo - 4/1/09 at 10:38 PM
quote:
Originally posted by Mark Allanson
You will never attach bike carbs to a type 9 box, its just not possible
Nothings unpossible 
Rob - welcome to the fountain of all knowledge
coozer - 4/1/09 at 10:42 PM
Engine HERE!
Cheers,
Steve
blakep82 - 4/1/09 at 10:45 PM
quote:
Originally posted by clairetoo
quote:
Originally posted by Mark Allanson
You will never attach bike carbs to a type 9 box, its just not possible
Nothings unpossible
Rob - welcome to the fountain of all knowledge
fountain of knowledge indeed, so lets try and answer his question
errr, i don't know the answer, but loads of other folk on here have done just that.
as i understand, any bike engine over about 600cc should be a good source for carbs. mine for my 2.0 vauxhall are from a zx9r. need a little
modifying, drilling of main jets, and an inlet manifolld needs to be made. look up shortrack123 on here. he laser cuts manifold plates and sells on
ebay. weld a few suitable diameter tubes at strategic places and angles, and connect with rubber tube. jobs a good 'un.
have a look on Jacko's photo archive on here. he'll be happy to answer questions on it.
gearbox, again easily done. i'm not sure which bell housings fit, but anyone with a zetec on here's done it
good luck 
blakep82 - 4/1/09 at 10:46 PM
or buy steves engine and most of the work's done for you
Bobyspit - 4/1/09 at 10:49 PM
quote:
Originally posted by coozer
Engine HERE!
Cheers,
Steve
Miles service histtory??? More info req!
I know I cannot attach a set of bike carbs to a tyoe 9 gearbox LOL but on a serious note what bike carbs on a Zetec 2.0 and how to attach to a Type 9
gearbox.
Thanks
Rob
Bobyspit - 4/1/09 at 10:51 PM
You guys reply quicker than I can type
All info accepted
nick205 - 5/1/09 at 11:18 AM
what car are you fitting all this lot in?
cd.thomson - 5/1/09 at 11:36 AM
Hi mate, currently waiting on parts list/quotes from SBD, Burton Power and Raceline for converting both Zetecs and Duratecs to RWD applications in a
sevenesque car.
I intend on posting in a separate thread so people can bookmark it if necessary, but I will post the link here when its compiled.
Bobyspit - 5/1/09 at 04:06 PM
quote:
Originally posted by nick205
what car are you fitting all this lot in?
Not a kit but a classic Triumph!
The 1.3 currently in place is a good motor putting out around 95bhp but I need a bit more power.
I have a ford Type 9 fitted and Megajolt ect. So a 2.0ltr Zetec seems the way to go
Rescued attachment carcompresses.JPG
Bobyspit - 5/1/09 at 04:07 PM
quote:
Originally posted by cd.thomson
Hi mate, currently waiting on parts list/quotes from SBD, Burton Power and Raceline for converting both Zetecs and Duratecs to RWD applications in a
sevenesque car.
I intend on posting in a separate thread so people can bookmark it if necessary, but I will post the link here when its compiled.
Great Idea I am very interested
