
Hi guys,am wondering if many people on here have a 7 with 2.0 16v vaux red top engine? if so is there any rough performance figures you could give (roughly 200 bhp)and any reliability issues i should be aware of. have only ever driven BEC but am interested in a change! its for fast road use only and possibly 1 track dfay in the summer. thanks.
It should be around this point NS Dev will pop up and tell you about his.
Performance wise its BLOOMING FAST - something like 60 in 4 seconds, so as fast as a bike & you get the ability to cruise and go in reverse.
Issues are it only just fits under stuart taylor / caterham body work but you'll be fine with MK / MAC / MNR as they've got extra height in
the chassis and or body work.
Hey I'm building a C20XE Dax Rush. Out of interest how are you going to generate the 200hp, NA or blown?
As Im sure you're aware these generated around 150hp when new. I'm fitting throttle bodies, a big bore exhaust and an aftermarket ECU and
I'm hoping for 175hp at the wheels.
Once youve figured out the ballpark BHP youre going to end up with then its time to look at the average mass of your finished car. My Dax should
hopefully end up around the 650 - 700kg mark, not superlight, with some creature comforts but not overly so. Your car may be different.
Then head over to www.letstorquebhp.com.
Using my figures:
Power at Flywheel (BHP) : 200
Weight without Driver (KG) : 700
Power to Weight Ratio (BHP Per Ton) : 290.30
0 - 60 (Secs) : 4.17
0 - 100 (Secs) : 10.75
60 - 100 (Secs) : 6.58
Quarter Mile (Secs) : 12.57
Terminal Speed (MPH) : 108.14
Drag Strip Quarter Mile (Secs) : 12.47
Drag Strip Terminal Speed (MPH) : 109.44
(The bhp is at the flywheel not at the rear wheels)
This method applys to any car setup.
cd.thomson wont all that differ with different wheel size, gearbox, diff ratio?
Daniel Mason are you fitting it to a car that is allready on the road?
You can call me Craig
Yep as with anything the number of variables is huge, even road surface is going to make a large difference.
the www.letstorquebhp.com calculator has a lot of information associated with it that explains that there a various fudge factors in the calculator.
They have used it on standard production cars to fine tune it.
I should have included a caveat that this should only be used for a ballpark figure. You can safely assume you wont hit 60 in either 1 second or 15
seconds, itll be somewhere around 4. You wont know precisely until its on the road 
Craig,
You'll have to fit plentyof luxuries to make it weigh 700kg!!!
Cheers,
James
Built my first MK with an XE.
Twin Dellorto 45's, 175bhp, 0-60, 4-4.5 sec, loooaaads a torque, transX straight cut close ratio box, LSD........wished i never sold it
The only thing faster is me current MK with
ZX 1400 in it!
Daniel, the difference between the two is the former was relaxed cruiser with power when needed, the latter is more revs, revs, revs and more GRIN
factor!
BUT both excellent cars in there own right.
Would like to have both if i could... but me garage and pockets are'nt big enough
Oh...and weighed in at 560kgs at SVA.
Lightened it a bit after, so prob about 550kgs
I'm using one.....that one <<< with DCOE's and megajolt.
179BHP on the megajolt map.......need to keep the weight down now and it should be 'interesting' 
BEST upgrade i made was the TransX straight cut box with long ratio first gear...
up to 60mph in first! all ratios all in right place.
Ditch that Sierra box.
I'm sure NS Dev's with posh throttle bodies and a good mapping session (plus ARP bolts) was a lot closer to 200 than 175.
quote:
Originally posted by MikeR
I'm sure NS Dev's with posh throttle bodies and a good mapping session (plus ARP bolts) was a lot closer to 200 than 175.
quote:
Originally posted by daniel mason
Hi guys,am wondering if many people on here have a 7 with 2.0 16v vaux red top engine? if so is there any rough performance figures you could give (roughly 200 bhp)and any reliability issues i should be aware of. have only ever driven BEC but am interested in a change! its for fast road use only and possibly 1 track dfay in the summer. thanks.
quote:
Originally posted by cd.thomson
quote:
Originally posted by MikeR
I'm sure NS Dev's with posh throttle bodies and a good mapping session (plus ARP bolts) was a lot closer to 200 than 175.
At the wheels?
Yep, flywheel.
Well thats quite exciting isnt it
, I think hearing from others with built versions of what im building has to be the biggest motivation! 