How do you get them out? They have stupid nipples in the middle, thus preventing me getting a drill bit in!
And while I'm at it does anyone have a spare inlet-end cap for one for beer tokens? Mine's scuffed quite badly.
When I dismantled one recently I found that the centre pins in the rivets punch through fairly easily, which makes it a whole lot easier to drill the
rivets out
OK, standby and we'll see. On your head be it 
woo hoo! Top boy, it works. I have a dent in the dining room table as well though!
And the drill has just woken up litlun! I might finish it tomorrow!
Where's the smug smiley when you need it.......
You can have one when I finish
quote:
Originally posted by contaminated
woo hoo! Top boy, it works. I have a dent in the dining room table as well though!
And the drill has just woken up litlun! I might finish it tomorrow!
im also after an end cap have been searching for weeks, even almost had a row with a guy at aa16 who tried telling me that the end cap does not fit
over the tube but fits inside of it, he really didnt believe me and was no help at all
Wife is in - although I was nearly out! It got worse - I covered the play room carpet in bits of metal, soot and broken drill bits. I also found that
the wooden blocks in Jenga make a good drift to get the cap off!
Not what I was expecting after all that. I don't know if the earlier ones are different but the inlet is welded to the tube and the sleeve is not
removable. I've not removed the outlet cap yet mind. Rivets are from space or somewhere as well!
Dissapointed in A16 - they were going to be my first port of call.
i was also dissapointed with them as they were recommended throught this site and iv never been let down on here, hopefully he was having a bad day
and i caught him at a wrong time.
let me know if you find an end cap as iv extinguished all avenues and am now stuck
chris