How do i know what main, idle, emoultion etc sizes are on my dhla 45s?
Are there any markings on them?
I have yet to take them apart due to having to sort out other jobs on the car.
Tommy

ps I wish i went fuel injecton now

The jets etc usually have the sizes stamped on them - they will be small so you might need a magnifying glass and you will have to take them out to see.

HTH

Cheers

Mark

they may not be the sizes that are marked on them as lots of guys drill them out with a micro drill set i do this to mine as its a very cheep way of rejeting your carbs.160 is 1.6mm 60 is 0.6mm and so on when jets are around £3 each and you can dill the lot for £3 drill set from ebay i know what i do.

quote:

---

Originally posted by thunderace
they may not be the sizes that are marked on them as lots of guys drill them out with a micro drill set i do this to mine as its a very cheep way of rejeting your carbs.160 is 1.6mm 60 is 0.6mm and so on when jets are around £3 each and you can dill the lot for £3 drill set from ebay i know what i do.

---