Anyone know the thread size for the temp sender on a pinto ?

I'm using a racetech gauge and the original ford sender is deffinately not the one to use.

I know i might get lucky and speak to someone at rally design that knows this but i thought i'd ask proper people 1st

i got 1 with my gauge,diffo colour to ford one,all diffo resistances so better get on the blower to raldes

John
yours working ok on the pinto ?
what colour ?

mine works fine,think its a special as its slightly diffo from the ford item,better get it from raldes to be sure

Its on my monday morning list

Just had exactly the same problem.

If RALDES can't help then ring Phil at Raceparts in Wallingford
01491 822000. highly recommended.

Tell him it's a Racetech gauge and it needs a sender for a pinto. It'll be about £4 plus £1 postage and you'll get it next day.

Blimey thats a good price.

cheers jonte

Neh bother mate....

They are an extremely helpful bunch and will still investigate and spend time on you even if you've not got the exact part number and your inside leg measurement handy.

Forgot to add this too, might be useful:-

http://www.raceparts.co.uk/info/contact.htm

Cheers

J.J

PS

it's 'JONTI' not 'JONTE'...that's some other probably younger and better looking bugger.

[Edited on 23/2/04 by jonti]