Found this on a forum for DURATEC



http://www.duratecperformance.co.uk/forums/showflat.php?Cat=&Board=duranews&Number=1



Re: A Duratec I4 1000HP ! the skys the limit [re: Duratec]
18/02/04 08:03 AM Edit Reply



we are currently producing a little over 1000 hp. We had problems keeping the head on the block during the season and were not able to go over 25 pounds reliably. During the off season we made some serious space shuttle style head studs along with a copper head gasket and stainless stell oring with receiver groove. we were invited to run at the Winternationals here in Pomona so we shall see if the upgrades worked. With our calculations if we can push 38 pounds of boost this weekend we should be pushing close to 1150hp to 1200 hp this is of course to the flywheel. We shall see. If anyone is interested in producing some Madd power with these motors Bergenholtz racing can do it. my email address is teambergenholtz@aol.com

Our press release on running this weekend is here

http://www.nhraimport.com/

1000-1200hp Turbo Duratec motors

Post Extras: