Board logo

can you name this part?
spud69 - 31/5/09 at 07:52 PM

I need a replacement one of these on the picture, its off a set of zx6r carbs. i've just found out one was missing and engine was only firing on 3 cylinders.

The problem is i don't know what its called and cant find a replacement. If somebody can point me in the right direction i would appreciate it.


Thanks.....Andy

[Edited on 31/5/09 by spud69] Rescued attachment carb needle screw.jpg
Rescued attachment carb needle screw.jpg


stevegough - 31/5/09 at 08:02 PM

I have no idea, but if that is one of the mixture screws, the carb must be HUGE !!!!


eccsmk - 31/5/09 at 08:03 PM


ReMan - 31/5/09 at 08:14 PM

Looks like a pilot jet (air) screw to me


mistergrumpy - 31/5/09 at 08:33 PM

As above a pilot jet screw from the bottom of the carbs next to the fuel bowl. I got one from a Kawasaki dealer when the o ring was perished on one of mine. Only cost a few quid. Not over £5.