Which connections is which on the clutch slave cylinder? Anyone know?

TIA

David
Rescued attachment m_P1010080.jpg

Check the bottoms of the holes , if they are the same it doesn't matter, if not then the bleed nipple/pipe needs to seal

Both appear to be the same, concave seats as normal

Thanks

Hi David,

When it's bolted to the g/box then which ever one is nearer to the top (TDC) must be the bleed I would have thought.
Air will collect at the top after all.

I can't be of more help as I used the Mundano one in my Getrag.
This had a long pipe on it with the bleed nipple on the end, which just pokes though a hole I drilled in the bell housing.
Lucky eh!

Paul G