Board logo

Megajolt - Runtime error - Microsoft isual C ++ Runtime Library
rich201283 - 12/3/10 at 05:59 AM

I connected upto the megajot configurator ok.
I ran the hypertermial command Via C and pressed S got no responce.
Now whenever i try to connect to the megajot configurator i get an error.

Does the firmware need re-flashing?


Microsoft isual C ++ Runtime Library

Runtime Error!

Program: ...lesMegajolt Lite Jr. Configurator v4.0.2mjljConfig.exe

This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.

mediabloke - 12/3/10 at 12:42 PM

quote:
Originally posted by rich201283
I connected upto the megajot configurator ok.
...
Program: ...lesMegajolt Lite Jr. Configurator v4.0.2mjljConfig.exe

Do you know if the MJ hardware is V3 or V4? The configurator software is version-specific: V3.x for V3 hardware, V4.x for V4 hardware. They're physically different too: V4 has surface-mounted components, IIRC.

rich201283 - 12/3/10 at 01:17 PM

Hi it is V4
The config software did work until i tried hyper terminal, i pressed C got no responce, then pressed S got no responce.

I then tried to re- connect to the config software where i get the error.

Im woundering if i started some sort of runtime process on the chip when i pressed C or S

I was going to try an flash the chip but i get an error when i try to run the dos command, Em: this is not a valid win32 application

[Edited on 12/3/10 by rich201283]

MikeR - 12/3/10 at 01:23 PM

first message

re-download the app and install it.

The application sounds like its trying to do something but its failing to do it. This is either cause their is a bug in the megajolt software or part of the XP / Vista / Win7 machines hasn't got the required instructions (the library is out of date). I've no idea what libraries are missing but running microsofts windows updater tool may help.


second message
you're trying to tell the computer to run something, but the thing you're telling it to run isn't a program.

Check the command you're typing in / re-download the application in case it was corrupted on download.

rich201283 - 12/3/10 at 01:54 PM

I have already tried downloading the software again, Ive also tried another laptop, Can any one advise how to re-flash the firmware as i get an error when i try - Im pretty sure the its the processor chip software thats causing the issue

mediabloke - 12/3/10 at 11:30 PM

quote:
Originally posted by rich201283
I have already tried downloading the software again, Ive also tried another laptop, Can any one advise how to re-flash the firmware as i get an error when i try - Im pretty sure the its the processor chip software thats causing the issue

Saw your query on Brent's forum. Did that sort it?

Francis