Hope somebody can help me. What is the best way to fit a mt 75 box to a 2.0L Zetec engine? Do i need to fit a different flywheel, clutch etc. Any help would be much appreciated

Easy to do. I think you can use 1.8/2.0 flywheel. Not sure which clutch but should be a standard Ford part, I fitted a lightened unit from Dunnel and they also supplied the clutch (which I suspect was straight from Ford). You will aslo need a Sierra spigot bearing which is a couple of quid. I used a DOHC Sierra starter motor, but others fit.

Thanks Zetec for your help