Not sure on which holes to use, would like it on its side.

So how have you guys mounted yours?

Pictures would fantastic...

Cheers

Rich

You can mount it by the bellhousing bolts or the exhaust studs and engine mount holes.

Heres mine

[img]
Description [/img]

I wouldnt use exhaust suds, could cause stress on alloy areas.
Bellhousing is best, stand should allow you mount and adjust so centre of gravity is such that the engine can be spun at any angle.

MIne was as above.

mine also as above

Mounted mine the same Rich

Zetec on a stand.... next to a broken V8



Spare head bolts and washers to prevent taking the flywheel off.



[Edited on 27/7/10 by coozer]

Duratec on its side



Duratec to Type9 Bellhousing