Did a bracket for my alternator and the plate for the engine mounts but where my alterantor is it will foul the engine mount, this is made worse as my engine is stored away from me so I cant easily check stuff for fitting.

So, pictures of your mounts would be ace.

Cheers

Rich

Rickard have a look in Dunk3 photo archive
Graham

Nice one, he's used the three I had in mind but two only look tapped on mine although could be just full of rubbish. (the right most one of the 3)


Description

Cheers mate, some good useful images in there.

Ta

R

[Edited on 4/9/10 by RichardK]

there's a fourth one behind the diagonal...

Rich, mine is a bit combined. engine mount shares the top hole with the alternator mount, which is the AC pump bracket modified as such.



There's pics in the build gallery on my blog.

LG,
Steve