I have had my 1600 xflow converted to run unleaded but I am now unsure what the timing needs to be.

Any ideas? It should be set at 10degrees for leaded petrol.

Thanks

Mark

I've read a multitude of answers!

Looking in the Burton Power catalogue, they say that the timing has to be retarded by 3 or 4 degrees if you plan to use regular unleaded. If you use super unleaded then you may not need to retard the timing at all.

This is a summary of their words - I have no personal experience yet (soon will, I hope) - so don't rely on this answer.

rgds,

David