Hi all
someone out there must have a manifold taken from a CVH engine fitted to a westfield /locost or similar, if any one has can you u2u any details like price and where you are, its the missing link in the project and is holding things up badly !!

Friend of mine has recently upgraded his Westfield from CVH to Zetec, so can ask if he's sold it yet. Drop me a U2U reminder and I'll ask him tomorrow for you!
FYI it's a genuine Westfield item, with single exit through bodywork underneath the main rail.

I found one on ebay, was lookign for a while for one to come up, paid £90 for a stainless 4-2-1.

It exists centrally so if you get a westy one make sure your engine mount comes off the alternator bolts further forward.
Also on the haynes it fouls the chassis diagnoal, I've removed mine and will weld a new one in that has a higher angle to it to clear.


IMAG0233 by mjb22001, on Flickr

Pic shows it fouling diaganol and the orginal engine mount

[Edited on 26/8/11 by mikeb]

[Edited on 26/8/11 by mikeb]