Afternoon all,

I hope you're well?

Is there any chance someone could point me in the right direction for the correct polo radiator to use with a zetec please?

Also, what are the dimensions of the said radiator?

Thanks in advance,

Chris

Searching for polo and under user name "Surrey Dave" Should fine you part nos.

[Edited on 16/9/11 by Bluemoon]

quote:

---

Originally posted by Bluemoon
Searching for polo and under user name "SurreyDave" Should fine you part nos.

---

I've had a look at surrey dave's posts regarding the radiators, and I've seen the dimensions, but any ideas which mk or part number I'd need?

Also, what is the switch for that I can see in the left hand side (from the rear) of the radiator? I've read somewhere it's for a temp sender, but if I'm using the one already on the zetec engine I have, do I need to use it?

Cheers again,

Chris

VW4 on this web page is the answer I believe

Lnky dinky to Northern Radiators


edit bit

The thermo switch would be the standard 2 pin VW switch and don't forget to buy a VW made Gasket when fitting it. it controls the electric fan.

[Edited on 16/9/11 by jollygreengiant]

[Edited on 16/9/11 by jollygreengiant]

quote:

---

Originally posted by ChrisLeary
I've had a look at surrey dave's posts regarding the radiators, and I've seen the dimensions, but any ideas which mk or part number I'd need?

Also, what is the switch for that I can see in the left hand side (from the rear) of the radiator? I've read somewhere it's for a temp sender, but if I'm using the one already on the zetec engine I have, do I need to use it?

Cheers again,

Chris

---