Hello all,

As titled, is there anyone that knows (or know of anyone that knows) these gearboxes inside and out including all flavours from different cars. If you can help please U2U me as i have an in depth question im praying someone can help me with.

Also does anyone happen to know (can they measure) the input shaft length and let me know the number for splints on a T5 taken from the Ford Cosworth.

Thanks in advance.

Chris

im going to go and measure the dims on the jeep box now mate, whats your tag code on your box?

FWIW
jeep ratios are
4.03
2.37
1.49
1
0.86

[Edited on 8/10/11 by liam.mccaffrey]

quote:

---

Originally posted by liam.mccaffrey
im going to go and measure the dims on the jeep box now mate, whats your tag code on your box?

FWIW
jeep ratios are
4.03
2.37
1.49
1
0.86

[Edited on 8/10/11 by liam.mccaffrey]

---

My input shaft is 180mm from the bellhousing mount flange and its a 10 spline. As far as i know jeep never used a WC box

my code is 1352-077, is your box from a sierra? it should have the suffix 134, 174 or 184 all WC boxes. if its from a TVR it should be 248

All have the followong ratios
2.95
1.94
1.34
1
0.8

Im gutted! The ratio are miles out

That is such a same, a brand new box would of been awesome. Im still thinking!

pics here








[Edited on 8/10/11 by liam.mccaffrey]

I had a look on Turbosport and none at the moment but there are some on ebay but it depends on how much you want to pay.

Hi, looking at the input shaft the splines look totally wrong should be 1" x23
look here
also the rear extension is completely different.
Ray

mine cost £400 about ten years ago.
Ray